- Year
- 1994
- Vehicle Model
- 80 Series
- Mileage
- 195750
1994 Toyota Land Cruiser - $12,500
Facebook Marketplace Ad
Upgrades:
SLEE Shortbus Bumper
Superwinch Tiger Shark 9500 Winch
White Knuckle Off Road rock sliders (DOM/10 degree angle/cat protection)
Dobinsons Coil Springs (C59-170/C59-185)
Dobinsons Gas Shocks (GS59-682/3)
Dobinsons Steering Damper (SD59-824)
Faulken Wildpeak 315/75R16 tires
Gobi Stealth Roof Rack with Sunroof Insert, Ladder and Lightbar Bracket
Dobinsons Rear Dual Roller Drawer with Fridge Slide and Wing Storage
Midland MXT275 15-Watt GMRS/Two-way Radio
New NAPA Battery (Feb 2024)
LED lights (interior/exterior)
Seat handles - 3D printed by Matthew Spencer
Seat Covers Canvas Cordura
Cup Holder Console Insert - BH3D Printing
Double Cup Holder - BH3D Printing
RAM dash mount - BH3D Printing
RAM OSH mount (currently used for the radio mic)
Pioneer DVD/Reciever with 6.2” Display with Backup Camera
Pioneer 6.5” 320W Speakers
Condition:
Mechanically sound–I would have no issue driving this anywhere. This is an adventure vehicle. AC blows cold, everything works (minus the D light IYKYK). NOT triple locked/Center diff-lock only. Surface rust but nothing of concern other than under the rear window seal (normal for this vehicle). It is not a beauty queen–has paint fading/clear coat peeling (patina!), rock chips and pin striping. The drivers front and drivers rear seat have tears. The passenger front door has a tear. Drivers front window seal has fallen inside the door (note the duct tape to keep down the wind noise).
Facebook Marketplace Ad
Upgrades:
SLEE Shortbus Bumper
Superwinch Tiger Shark 9500 Winch
White Knuckle Off Road rock sliders (DOM/10 degree angle/cat protection)
Dobinsons Coil Springs (C59-170/C59-185)
Dobinsons Gas Shocks (GS59-682/3)
Dobinsons Steering Damper (SD59-824)
Faulken Wildpeak 315/75R16 tires
Gobi Stealth Roof Rack with Sunroof Insert, Ladder and Lightbar Bracket
Dobinsons Rear Dual Roller Drawer with Fridge Slide and Wing Storage
Midland MXT275 15-Watt GMRS/Two-way Radio
New NAPA Battery (Feb 2024)
LED lights (interior/exterior)
Seat handles - 3D printed by Matthew Spencer
Seat Covers Canvas Cordura
Cup Holder Console Insert - BH3D Printing
Double Cup Holder - BH3D Printing
RAM dash mount - BH3D Printing
RAM OSH mount (currently used for the radio mic)
Pioneer DVD/Reciever with 6.2” Display with Backup Camera
Pioneer 6.5” 320W Speakers
Condition:
Mechanically sound–I would have no issue driving this anywhere. This is an adventure vehicle. AC blows cold, everything works (minus the D light IYKYK). NOT triple locked/Center diff-lock only. Surface rust but nothing of concern other than under the rear window seal (normal for this vehicle). It is not a beauty queen–has paint fading/clear coat peeling (patina!), rock chips and pin striping. The drivers front and drivers rear seat have tears. The passenger front door has a tear. Drivers front window seal has fallen inside the door (note the duct tape to keep down the wind noise).
