SOLD MD/DC/VA - 99 LX470 White / Tan Part Out

[ctowncat]

Can you send me a DM for how much are the tail light clusters? I’m local to Maryland so can pickup.

 

[NerfSpecOps]

I don’t know if they would be worth it once you factor in shipping. With size and weight my guess would be a few hundred in shipping alone? If you were local it would be a name your price type deal.

Okay I may be passing through your area next week, ill just have to see if I want to even fix those up…

 

[KiPod]

Okay I may be passing through your area next week, ill just have to see if I want to even fix those up…

Let me know

 

[WGermer]

Any chance you have the front passenger seat arm rest available still, and any of the 3rd row upper vent covers left? Shipped to Utah 84037.

Thanks!

 

[Gogo87]

Part arrived today. Exact item in pictures and awesome seller.

 

[Rcco]

cup holder ( 2nd row on center console)?

 

[KiPod]

Any chance you have the front passenger seat arm rest available still, and any of the 3rd row upper vent covers left? Shipped to Utah 84037.

Thanks!

Arm rest on the seat? Yes
Arm rest on the door panel? Yes
I believe I have all the third row vents still in the headliner.
PM offer for parts and then we can add shipping after that.
I’ll try to get pics tonight.

 

[KiPod]

cup holder ( 2nd row on center console)?

One of the first things to have sold.

 

[NerfSpecOps]

I have them but the leather and cushions are DONE.
View attachment 3216564View attachment 3216565

No worries. I’ll be in the area next Friday. Do you have the headrests/ do you know if the motors all work and if the heaters work?

 

[WGermer]

Arm rest on the seat? Yes
Arm rest on the door panel? Yes
I believe I have all the third row vents still in the headliner.
PM offer for parts and then we can add shipping after that.
I’ll try to get pics tonight.

I pm’d you an offer. Not sure if you’ve seen it yet.

 

[KiPod]

Hi, looking for both front AHC “shocks” including attached lines/hoses?
tx
Brad

My coworker did take all the AHC stuff.

 

[KiPod]

Can you send me a DM for how much are the tail light clusters? I’m local to Maryland so can pickup.

Im keeping the LED tails to swap onto my 99. Once the swap is done I’ll have the 99 parts available.

 

[KiPod]

Any chance you have the front passenger seat arm rest available still, and any of the 3rd row upper vent covers left? Shipped to Utah 84037.

Thanks!

here’s the vents. I’ll check PM

 

[KiPod]

No worries. I’ll be in the area next Friday. Do you have the headrests/ do you know if the motors all work and if the heaters work?

Seat heaters and motors worked when I stopped driving it and I did find the headrests (which are clean).

 

[dubdub20003]

Have looked at your thread before but never noticed you have the steering wheel still in there. Is that still available? I need one just to send mine out to be recovered, so condition does not matter.

 

[KiPod]

Have looked at your thread before but never noticed you have the steering wheel still in there. Is that still available? I need one just to send mine out to be recovered, so condition does not matter.

I’m holding on the steering components so I have the ability to move around as needed.

 

[NerfSpecOps]

Seat heaters and motors worked when I stopped driving it and I did find the headrests (which are clean).

Great thanks. If you can DM me your location/ what you're thinking on price, I'll take them. Ill be passing through DC on my way up from Norfolk next friday.

 

[SteveH]

How about the high-mounted stop lamp on the outside of the rear hatch? The end of mine is snapped off. I'm hoping yours is intact, working, and the plastic is not terribly faded or dull. I can buff it a bit if slightly dull. Thanks!

(For removal, the light is retained by 10mm nuts under rubber covers beneath the hatch trim).

 

[KiPod]

How about the high-mounted stop lamp on the outside of the rear hatch? The end of mine is snapped off. I'm hoping yours is intact, working, and the plastic is not terribly faded or dull. I can buff it a bit if slightly dull. Thanks!

(For removal, the light is retained by 10mm nuts under rubber covers beneath the hatch trim).

Do not have a spare of that. I would recommend new because if I remember correctly, the older they get, they flex up and the seal isn’t as good. Water can enter and lead to rust issues down the road. Just something to think about.

 

[SteveH]

Thanks! They are $297 new (list), and Chinese ones are $40 on eBay. I re-sealed mine with Butyl rubber caulk and may just live with it until I can find a good one. I have carefully checked my hatch for rust and it seems good, but thanks for the reminder.