Low Pressure Power steering line? (1 Viewer)

[Brantleysvt]

Ive recently come into a problem. My low pressure power steering line has decided to give out after 30 years on my fj62. My question is, is there anyone who sells the metal portion of the power steering line? I know it’s a 3/8s line and I can bend one out myself, but if any cruiser companys produce the line aftermarket, I’d rather support them.
Thanks!

 

[OSS]

Just bolt an aftermarket power steering cooler next to the radiator on the outside. Don't use a transmission cooler - they're too big.
Jpegs.com has a lot to choose from. Doesn't have to be fancy or high performance

power steering cooler - JEGS High Performance

1 million+ parts, 800+ brands-all in-stock at guaranteed best prices. Buy by 11pm & your order ships same-day. Trust JEGS to get it right. Shop now!

www.jegs.com

 

[3_puppies]

which part of the low preasure line?
the rubber hose at the steering box?
the rubber hose to the resevoir?
the metal hard line under the rad?

has the high preasure line been replaced?

 

[ToyotaMatt]

Ive recently come into a problem. My low pressure power steering line has decided to give out after 30 years on my fj62. My question is, is there anyone who sells the metal portion of the power steering line? I know it’s a 3/8s line and I can bend one out myself, but if any cruiser companys produce the line aftermarket, I’d rather support them.
Thanks!

YES ,

i carry and stock ALL the OEM Low pressure Return line fittings , right now

it is NOT a /3/8 " ?

its a JIS , double Inverted Flair very special slighted taper too , like a 8-10 % only taper


see below "

thanks

note this is a fj60 parts diagram for general reference

you get the ideas ///

thanks matt

 

[ToyotaMatt]

I also have had My SKUNK WORKS LAB , Rising Sun Mechanical ..

faithfully Reproduce in-house with our own 2 hands , the most early of the return like fittings at the BOX itself ...

this is the smallest size toyota toyota made on the MINI truck box , and the FJ40 as well ......

We use Copper Nickle Alloy TOP SHELF grade rust proof tube , hand bend it with hand benders as well ....

we source ALL our JIS threaded service flare fittings straight from JAPAN ........

there triple zinc plated as well

we specialize in Reproduction Toyota NLA / DISC. parts

VintageTEqParts.com

vintageteqparts.com

 

[ToyotaMatt]

Here is the USA spec, 8/80-9/87 FJ60LG-KA Low pressure and High Pressure Supply Lines

We have also Reproduced IN-HOUSE the NLA High Pressure Line assy. call out # 44411

OEM SKUNK WORKS Part Re-issue part # 44411-60131-R

only the Best Materials and workmanship make our CUT .....period

High Pressure Power Steering Line / Hose Fits 8/80 - 9/87 FJ60 2F Call out # 44320 - VintageTEqParts.com

High Pressure FEED Power Steering Line / Hose Fits 8/80 - 9/87 Fits FJ60 2F / LHD Drivers Side...

vintageteqparts.com

 

[ToyotaMatt]

Ive recently come into a problem. My low pressure power steering line has decided to give out after 30 years on my fj62. My question is, is there anyone who sells the metal portion of the power steering line? I know it’s a 3/8s line and I can bend one out myself, but if any cruiser companys produce the line aftermarket, I’d rather support them.
Thanks!

here is your FJ62 Line we also have made custom IN-HOUSE

FJ62 High Pressure Power Steering Line / Hose Fits 8/87 - 1990 FJ62 3FE USA Spec. Call out # 44320 / 44410-60170 - VintageTEqParts.com

High Pressure Power Steering Line / Hose Fits 8/87 - 1990 FJ62 3FE USA Spec. - SPECIALTY MADE FOR...

vintageteqparts.com

 

[Michael Hanson]

Hi, Any good hydrulic shop can make any of the lines. Mike