leaky carb

[76FJ40]

One of the 40s Matt owned had an intake that was apparently repaired with JB Weld. It had a header so no heat riser to bake the JB Weld. Seemed to work OK as I recall.

 

[DustyFJ]

One of the 40s Matt owned had an intake that was apparently repaired with JB Weld. It had a header so no heat riser to bake the JB Weld. Seemed to work OK as I recall.

I picked up the manifold looks like they drilled a hole and opened up the gap to about 1/8" to make it easier to weld then ran a bead but i guess they got it so hot the crackk got way bigger and even cracked right through the new weld as it cooled, they pretty much destroyed it...

 

[jcj_78FJ40]

I picked up the manifold looks like they drilled a hole and opened up the gap to about 1/8" to make it easier to weld then ran a bead but i guess they got it so hot the crackk got way bigger and even cracked right through the new weld as it cooled, they pretty much destroyed it...

fyi
Toyota Landcruiser FJ40 2 barrel Intake Manifold for the F motor.

 

[DustyFJ]

fyi
Toyota Landcruiser FJ40 2 barrel Intake Manifold for the F motor.

I've got a 2f that was put installed in 79 the the best of the po's recollection. I'll have to start searching for one.

 

[Stumpalama]

How aboit this: 1985 Landcruiser FJ60 Parts UPDATED. All offers considered.

 

[jcj_78FJ40]

I'm running a 60 intake for the same reason.

The same gaskets are called out for 70 thru 87. I don't think the design changed much over the years. Maybe the newer manifolds have extra tapped holes for carb fan sensors and stuff??

 

[DustyFJ]

emailed that guy about the manifold

 

[Jakes40]

fyi
Toyota Landcruiser FJ40 2 barrel Intake Manifold for the F motor.

This manifold will work for you. Mine started life as a single barrel carb. I am running a 2 barrel now just use your old carb spacer.

 

[76FJ40]

I found what looks to be a 1 bbl intake while moving. Free, come and get it.

 

[DustyFJ]

I found what looks to be a 1 bbl intake while moving. Free, come and get it.

My favorite price, sending a PM