Wheels off ground. Have tested the tie rods as best I can and all feel tight. However, the piston that the inners attach to can be moved in and out some by turning the wheel by hand.
Is this a normal sort of play in the steering rack? (1 Viewer)
- Thread starter rommelrommel
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
If you believe the inner and outers are good, inspect the rack bushings. I’ve recently had the same issue and the rack bushings were shot.
- Thread starter
- #3
Thanks, I will check that out.
This is good advice, I just recently checked mine and my wheels are doing the same thing! I'll have to check it out for myself!
Almost certainly the rack bushings. I had the same problem with mine and put in a reman rack. Big improvement in steering/handling.
Other than the bushings, my rack seemed to be working fine, but there were quite a few metal shavings in the fluid that came out of the old one.
Other than the bushings, my rack seemed to be working fine, but there were quite a few metal shavings in the fluid that came out of the old one.
