We have a 2018 LC200, and the OEM battery failed as our temperatures dropped last week. I swapped out the battery this weekend and noticed that I could no longer lower or raise the passenger front window from the driver side. The passenger could lower and raise the window from the passenger side, but the auto down/up feature wasn't working. The timing was suspicious, so I looked through the FSM and noticed that the power windows may not operate properly if the LC200 thinks that the specific window needs to be calibrated. Calibration entails lowering and raising the window completely from the respective switch. Once I did this, I was able to control the window from the driver side, and the auto lower/raise was working again as well. Just a PSA.
Interesting battery swap behavior - power windows
- Thread starter beveldrive
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
SOP on all auto windows after battery change out.
Markuson
SILVER Star
Hmm... Never happened to me in the zillion times I’ve disconnected batteries over the years with my 2008...
