I put an end to my wife's fear of jacking

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Any for an FJ Cruiser?
 
Phil, I need one for the 100 and one for the 200.
Local pick up.
 
We have two sizes -
►1.5" post jack
►2" post jack
so far all Toyota jacks fit one of the two sizes.

2011 FJ Cruiser mine is 1.5". So I'll take one in that size if available.

Thanks,
Chris
 
Last edited:
Playing with jack placement on the LX470 (should be similiar to the FJ Cruiser) prior to replacing the front brake pads.

IMG_5703.jpg
IMG_5706.jpg
 
For those sitting on the fence, I used mine a few weekends back to rotate tires and do rear brakes, and it definitely gives more confidence during the lifting and lowering phase (*before Jack Stands go under). Highly recommended, and the shape gives a lot of places where they can be used.

Aside, I had no idea the factory jack went that high! I always use 4x8 blocks under mine and figured it was only good for about 6-8" until that photo above,
 
For those sitting on the fence, I used mine a few weekends back to rotate tires and do rear brakes, and it definitely gives more confidence during the lifting and lowering phase (*before Jack Stands go under). Highly recommended, and the shape gives a lot of places where they can be used.

Aside, I had no idea the factory jack went that high! I always use 4x8 blocks under mine and figured it was only good for about 6-8" until that photo above,

Thanks LongDuck for the positive feedback.

Our testing has proven if the tire will fit on an 80 the factory jack with Adapter can be used to service it.
 
I'll take one, pick up next CSC meeting?
 
Probably should of had this before doing my rear lift....better late then never. Order placed.

It one of those items you want to have if you need it but you never want to need it. Piece of mind for me;)
 

Users who are viewing this thread

Back
Top Bottom