I have a OZ spec fj45 questions about seats . (3 Viewers)

[Themcfarland]

Greetings.
I Have consumed several pages and posts about the options for seat bracketing in our trucks.
I am somewhat confused for what I want .

I have an Oz spec 45 it's titled as 82 but it's really 84.
It's RHD.
So I'm not entirely sure all of them has the single driver seat then passenger bench or not but this one does.
The tank is under the driver seat .

I am considering 2 buckets .
The bracketing is confusing me. I see two main style of aftermarket seat attachments and size and also see that there is a 3rd that removes the gas tank.

Since there isn't a real need for any of the extra heater or anything in later model seats .
I don't see many of the 40 brackets but tons of the 60s style brackets . Are these the same spaces apart for mounting ?
Are the brackets even what's used in aftermarket seats in an 40 or 45?

 

[whitey45]

I have an 81 hj47, rhd with the factory bucket( 40/60 bucket bench combo originally, I simply unbolted the pass bench and installed a lhd bucket( these are hard to find, but us spec 40’s 79/84 have the same brackets. Think I had to drill one hole to make it all work.(I think 60 series buckets work too.

 

[Themcfarland]

I have an 81 hj47, rhd with the factory bucket( 40/60 bucket bench combo originally, I simply unbolted the pass bench and installed a lhd bucket( these are hard to find, but us spec 40’s 79/84 have the same brackets. Think I had to drill one hole to make it all work.(I think 60 series buckets work too.

Thank you for that.
Did you ever consider the 60s brackets ? I can't tell but they seem very similar, I just don't have any I can put my eyes on to see what others have done.