For Sale I have a bunch of random parts from various year FJ40's

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 26, 2005
Threads
473
Messages
4,668
Location
Oregon
Location
United States
Way too many to list all of them.

These all come from the many resto's / parts collecting I have done over the years.

Post up what you need I may just have it.

Some random examples would be:
Throttle linkage for 78
Washer / coolant bottle for 78 and 74 I think
Transfer case housing with most of the gears in it
Complete rear heater set up from a 78 (includes hoses covers etc)
Front Heaters (complete)
Water Heater valve
various dash knobs from 69 - 78
Glove box doors
I have like 4 or 5 guage clusters. (I cant guarantee any of them)
Older style door parts
Newer style door parts
A couple skid plates. (sandblasted and primed!)
A gas tank with some pin holes for a 69. (its sandblasted easy an fix)
Pedal buckets
A couple lower dash pads in decent shape
A have a complete carb from the 78. Was working when I pulled it, but prob could use a kit
OEM exhaust manifold for the 78

And just a bunch of other stuff...

Prices will vary based on condition etc...

Post up here or email me at thecrazygreek@comcast.net

Put FJ40 Parts in the subject line please... Offers accepted...

I'll try to answer as often as possible.
 
I'll try to post up some pics of the items that people have emailed me about later today...
 
A couple people have asked me what condition the parts are in generaly speaking...

These are all in used condition. If it were me, I would restore any of this stuff before installing. At minimum a respray...

Example would be the front heater would need all new foam and be lubed up. It will function as is but not look that good and not perform as well as it should.

The washer bottle looks like a 35 year old washer bottle. I usually soak mine in a diluted acid etch that I use for metal for a few minutes. Looks pretty good after that.

The guage clusters would need a resto, as in new paint and sticker set which are now available on ebay for like 20 or so...

If you would like me to restore the parts for you I am open to that, but it may take a bit of time, and cost a fair amount more...

Anyhoo, just thought I would add that info...
 
All of my clusters are 78 and older... Not sure about the amps...
 
Interested in Rear Heater if TCSTARK doesn't get it.
 
Waiting on payment instructions for restored front/rear heater set up.

I started getting the rear heater blasted etc.. I'll let you know regarding payment...
 
Some shots of the rear heater restore for tcstark. Started blasting parts and getting them into primer.

1406562029679.webp


1406562067505.webp


1406562106982.webp
 
How about the driver's side amby door latch linkage - the wire connectors that retract the top and bottom latch when you turn the inside door handle.
 
I would be interested in a gauge cluster that isn't pitted. Mainly needed for the outer face, because mine is dented.
 
Guage cluster that's not pitted for 50. Can't guarantee all gages work. The face only for 25.
 
ImageUploadedByIH8MUD Forum1407101803.879984.webp


The outer pewter colored bezel for $25 works for me, since I don't actually need the gauges or cluster. I'll pm to make payment arrangements.
 
Some switch pics for those who have asked.

1407291901402.webp


1407291916338.webp


1407291934214.webp
 
Back
Top Bottom