Builds Homer's 2003 GX470 Build 8.2 4.56 2.5 34s (1 Viewer)

[HomersCanyonero]

Rig looks great with the lift/wheel/tire combo!

Thanks! I still need to cut and hammer things in the back of the front wheel well…it still rubs

 

[HomersCanyonero]

Hidden snorkel going in. I hope this works.

At first I tried a 4” diameter rigid metal pipe with a 90* silicone elbow (4” to 3.5” elbow), but that didn’t fit.

So, I took the stock factory rubber intake end and cut the end and attached it to a 3” flexible air intake hose with metal ends.

Used 4” clamps to attach the factory rubber end to the new 3” flexible air intake with metal end caps.

It fits way better and it’s attached pretty solidly. There’s a blue-like ring in one of the photos…that’s the metal clamp that’s attached pretty tight over the factory rubber end and the new 3” flexible air intake hose with metal end cap.

 

[HomersCanyonero]

Well…I changed my mind. I put back the stock rubber end cap and covered it with a water/dust sock.

I still have 75% of my wheel liner in there