Where are you guys mounting your holsters in the 200? I've seen the molle panel for the side of the center console, I ran one in my GX and I wasn't the biggest fan. How it mounted and where it was located weren't ideal, it was always in the way of my accelerator leg and if/when I moved the seat forward. I run a molle panel off the front of my seat in the truck which puts it directly between my legs for an effortless blind draw but I am not aware of something like that for the 200. Any ideas?
Holster mount
- Thread starter Tex68w
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
My IWB holster clips onto the door's map pocket no problem. Stays in place and out of the way.
Have you checked out this center console mount from Land Cruiser Center Console MOLLE Panel | 200 Series Land Cruiser (08-21) - Victory 4x4 - https://www.victory4x4.com/product/V200CC.html ?
Not a huge fan of not having a round in the chamber, but what about this?
vulcanarms.com
Combo Protection Pack
PRODUCT & ORDER OVERVIEW Military Grade Cleaning Combo | Solvent 8 OZ | Oil 2 OZ The Vulcan Carbon Killer Combo Pack has arrived! This pack includes the Carbon Killer Cleaning Solvent and the Carbon Killer Cleaning Oil. This combination is the one-two punch you need when it comes to cleaning...
vulcanarms.com
- Thread starter
- #8
Not a huge fan of not having a round in the chamber, but what about this?
Combo Protection Pack
PRODUCT & ORDER OVERVIEW Military Grade Cleaning Combo | Solvent 8 OZ | Oil 2 OZ The Vulcan Carbon Killer Combo Pack has arrived! This pack includes the Carbon Killer Cleaning Solvent and the Carbon Killer Cleaning Oil. This combination is the one-two punch you need when it comes to cleaning...
I've seen those advertised quite a bit. Neat idea but it's not for me.
What about something simple like this? You could put it where you want and where it works best for you. No need to remove holster either. Just re-holster.
vulcanarms.com
QUICKDRAW MOUNT: STANDARD
QuickDraw Magnetic Gun Mount for flat top handguns. Perfect car & truck gun mount, or for storing handguns on any flat surface in your home, office or anywhere else you need. Helpful magnetic gun holster design.
vulcanarms.com
- Thread starter
- #11
Exactly, which is why I am looking for alternatives to what's already out there. I love the mount from Desert Does It that I have in the truck and if they are about to work on development for the 200 I can continue to wait. I have a universal holster permanently mounted that attaches at the light and can fit most plastic fantastic models and 1911/2011's so it'll cover anything I am carrying that day. Slide it in the holster between my legs when I get in the truck and reholster on my person before I exit the vehicle, good stuff.
@Tex68w thanks for drawing discussion on this. I check the DDI website and did not see specific for LC. Can you recall which general mount you purchased in your pictures? Possibly the Tundra version? TIAExactly, which is why I am looking for alternatives to what's already out there. I love the mount from Desert Does It that I have in the truck and if they are about to work on development for the 200 I can continue to wait. I have a universal holster permanently mounted that attaches at the light and can fit most plastic fantastic models and 1911/2011's so it'll cover anything I am carrying that day. Slide it in the holster between my legs when I get in the truck and reholster on my person before I exit the vehicle, good stuff.
- Thread starter
- #13
The pictures are for the mount in my RAM 3500. DDI said they just finished development for the 100 Series Land Cruiser but it's not yet to market and they are about to start development for the 200 Series so I wouldn't expect one until next year.
i'd love to see a way to remove the front panel of the seat and maybe tuck something in there. It's on my long list of TO DO projects.
I was thinking of putting a small safe under there.
I have read taking off that panel is much more involved. Not just snap out. I think you need to turn the seat over and remove screws and other panels too.
But I'd love to know if any one has tried.
I was thinking of putting a small safe under there.
I have read taking off that panel is much more involved. Not just snap out. I think you need to turn the seat over and remove screws and other panels too.
But I'd love to know if any one has tried.
What is the point of carrying then? Might as well carry a nerf gun or water pistol.Not a huge fan of not having a round in the chamber, but what about this?
Combo Protection Pack
PRODUCT & ORDER OVERVIEW Military Grade Cleaning Combo | Solvent 8 OZ | Oil 2 OZ The Vulcan Carbon Killer Combo Pack has arrived! This pack includes the Carbon Killer Cleaning Solvent and the Carbon Killer Cleaning Oil. This combination is the one-two punch you need when it comes to cleaning...
I spoke with the owner of Desert Does It this past spring about a mount for the 200. Said he was trying to get some specs but had nothing in development at the time. I really hope you are right and they are addressing this issue for the 200. Front of the seat is a perfect location if you are left handed.
- Thread starter
- #17
The correspondence was earlier this week, it will be in development soon.
Markuson
SILVER Star
Hmmm. Wouldn’t that make your firearm visible every time you open your door?
Just jump in and out of the window Dukes of Hazzard style.
