High Pinion E-locker!

[yotaman]

I have a High Pinion E-locker. It has stock 4.10 gears in it. I'm asking $700.00 OBO. Motor has been tested and locks and unlocks without any problems.

I'm located in Cumming GA and you can contact me via PM or email if you have any questions.

 

[chajazz]

what size?
what did it come out of?

 

[Fast Eddy]

To clarify, this is an 8" and won't fit a Land Cruiser, right? Other than an 80 series front end.

 

[yotaman]

Sorry guys.

Yes it's an 8" differential and came out of an FZJ80 front end. It'll fit any 8" housing with a few easy modifications.

 

[LCPilot]

How many miles when it met it's untimely demise?

 

[yotaman]

How many miles when it met it's untimely demise?

Not really sure but the salvage yard said it was low mileage.

 

[82-SOA-60]

Sorry guys.

Yes it's an 8" differential and came out of an FZJ80 front end. It'll fit any 8" housing with a few easy modifications.

Interested.
Just need to find out more about the mods.

 

[yotaman]

Interested.
Just need to find out more about the mods.

I'll PM you some links in a few minutes.

 

[yotaman]

Here's a good right up on modifying an 8" housing so you can install an E-locker in it.

http://www.4x4wire.com/toyota/tech/electric_locker/

I have a brand new Toyota e-locker gasket I'll throw in with the e-locker.

 

[Cube Dweller]

If you can weld, drill and tap a hole, and can file a surface flat, it's an easy mod. Couple hours on a disassembled housing. And it's a great locker.

 

[yotaman]

Still got it in the garage. I haven't really been trying to sell it but I'll lower the asking price to $600.00 plus shipping OBO.

 

[yotaman]

Bump! Need this gone. Need $$$ for other projects.

 

[yotaman]

Sale pending! Waiting on payment.

 

[Romer]

If your sale falls through let me know. My daughter needs a front locked third for her truck.

 

[yotaman]

If your sale falls through let me know. My daughter needs a front locked third for her truck.

I haven't posted them yet but I have 2 Low Pinion E-lockers for sale also. They both have 5.29 gears. The gears are cryo'd (this makes them last longer and wear better, some say it makes them stronger) by Bobby Long from toyotasuperaxles.com and the gears and everything were installed by ZUK of gearinstalls.com. If you're interested let me know.

I'm going to post them up later when I get pictures but if anyone is interested in them let me know and I'll get off my a$$ faster to get some pictures.

 

[Romer]

These are for a front on an 80?


She has 4.11 gears now. If you told me 4.88's I would consider, but 5.29's are too much for how she is setup.

 

[woosung]

is the high pinon still around?
interested if so

 

[yotaman]

It's been SOLD.