HF2AV Transfer Case Input Gear Question

[Will Van]

I am machining a custom output shaft for my NV4500 5 speed transmission to work with the HF2AV Toyota transfer case. The machinist would like the HF2AV input gear from the transfer case so he can machine the 19 splines perfectly.

I cannot find the replacement PN for the Toyota HF2AV input gear. Does anyone know it?

I ordered Toyota PN 36212-60100 but that gear is incorrect. It has too many splines and is way too large. Am I missing something?

Alternatively, is the replacement input gear on a split case 60 series similar? In other words, would it work for the purposes of machining the splines on the NV4500 output shaft? https://www.cruiserbrothers.com/product/modified-tc-input-gear-19-spline-mainshaft-36212-mod32/

 

[lazy]

pretty sure that is the correct gear. I have one laying around in my garage I can get to tonight. I'm sure some other parts wizard knows the answer off the top of their head though....

 

[OGBeno]

The HF2AV has an input shaft that adapts the transmission input to the transfer gear.

You have the correct gear. You need the input shaft 36211-60030.

 

[cruiserdan]

The shaft identified by beno is item # 36211 in this diagram:

 

[Will Van]

The HF2AV has an input shaft that adapts the transmission input to the transfer gear.

You have the correct gear. You need the input shaft 36211-60030.

The shaft identified by beno is item # 36211 in this diagram:

Thank you, you are true gentlemen!