Parting Out Hamilton, Montana. 1973 FJ40 Project (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 30, 2014
Threads
15
Messages
395
Location
Montana
Location
United States
Project in pieces, all or considering parting out.

The truck is down to the frame. It's been sandblasted and the underside of tub blasted. Very clean as far as rust goes. PO had it undercover. My plan was: Vortec, NV4500, Atlas II, New Alcan rear FJ60 length springs w/axle moved back for WB, SOA, front springs flipped with SR and rear shackle hangar through frame to keep it low, 4 wheel disc brakes. New Diamond axle housings front and rear stuffed with RCV Performance axles. Rear is centered for the Atlas II 5:1, and also 4Runner rear disc brakes w/parking brake set up from Front Range. Front axle is built up w/ disc brakes from Cruiser Outfitters. All new parts. New hubs. 4x4 Labs FROMBE steering, 4x4 Labs steering brackets already welded in and w/ new Downy style 4 turn gearbox. Downey external fuel tank. Vortec GenIII 5.3 engine w/ AA mounts welded in, 133K on engine and it's been sitting but was preserved. AA Bellhousing and Centerforce clutch for NV4500. NV4500 is a Chevy but with Dodge tail housing to keep it short for rear driveshaft angle and has new 5th gear. 1st gear 5.64:1. New aluminum radiator for Vortec w/ mount fabbed. Hardtop in good condition. Over 23K invested. Asking $15K, will consider offers
IMG_7688.jpeg
IMG_7689.jpeg
IMG_7688.jpeg
IMG_7689.jpeg
 
Last edited:

Users who are viewing this thread

Back
Top Bottom