SOLD H55F and Split T-case

[Tank5]

Location

United States

Price drop $1800 1750

I am selling a h55f with attached t-case. It is a Canada spec. Hzj75 series land cruiser that has the input shaft for a 1hz, the split case has the 38mm idler shaft. It was inspected by a reputable Land Cruiser shop before I got it and they said the gears looked good inside of the trans and t-case.

I only have what you see, no additional parts included. Asking 2600, it is located in Northern New Mexico. Willing to ship buyer pays shipping.

Pictures coming soon.

 

[Dustin Messina]

Sweet setup!

 

[3_puppies]

I am selling a h55f with attached t-case. It is a Canada spec. out of a 60 series land cruiser. It was inspected by a reputable Land Cruiser shop before I got it and they said the gears looked good inside of the trans and t-case.

I only have what you see, no additional parts included. Asking 2600, it is located in Northern New Mexico. Willing to ship buyer pays shipping.

Pictures coming soon.

you should state which input it has, "H" or "B" as both were in Canada and both in 60 series.
also which idler it has 34 or 38 mm

 

[Tank5]

you should state which input it has, "H" or "B" as both were in Canada and both in 60 series.
also which idler it has 34 or 38 mm

I know the input shaft has 21 spline but I will have to do some research to answer your other questions.

 

[3_puppies]

21 spline?

 

[Tank5]

you should state which input it has, "H" or "B" as both were in Canada and both in 60 series.
also which idler it has 34 or 38 mm

I have been able to confirm this setup came out of a hzj75 mine truck. Not a 60 series. I believe that fits a H model. I am still researching to determine idler size.

Sale pending

 

[3_puppies]

HZ input is different than an H input.
the H input is the same as an F input.

 

[Tank5]

HZ input is different than an H input.
the H input is the same as an F input.

So then it must be a B input if it is not an H or is there another option. I am not real familiar with the toyota diesel seen. It has a plate on it with a serial number from miller technology, they told me what vehicle it came from but didn't know much more.

 

[3_puppies]

So then it must be a B input if it is not an H or is there another option. I am not real familiar with the toyota diesel seen. It has a plate on it with a serial number from miller technology, they told me what vehicle it came from but didn't know much more.

almost certain HZ input is its own animal, different than both H/F and B inputs

 

[Tank5]

almost certain HZ input is its own animal, different than both H/F and B inputs

Thanks! Interesting.

 

[joekatana]

B/3B and 1HZ use the same splines but a slightly different shaft length (fine spline)

F H and 12HT have the same shaft (coarse spline)

 

[ukaviator]

@Tennessee80

 

[Tank5]

Bump

 

[Tank5]

Bump still for sale.

 

[Tennessee80]

So did you determine if it is course or fine spline? I have a 3FE... and according to @joekatana I need the coarse spline

thanks, @ukaviator !

 

[Tank5]

So did you determine if it is course or fine spline? I have a 3FE... and according to @joekatana I need the coarse spline

thanks, @ukaviator !

It is fine spline.

 

[BreckenridgeCruiser]

Pm sent

 

[Tank5]

The idler shaft on t-case is 38mm.

 

[Tank5]

Bump, open offers and added pictures

 

[Tank5]

Price drop 1750.00