H41 questions (1 Viewer)

[bbace]

I'm swaping out an H42 with a used H41. Opened the H41 up and found a spring from the #1 synchronizer ring subassembly on the bottom of the tranny. Everything else looks good. Checked two H42s and they did not have any of these springs. Two questions: 1) Can these springs be replaced? I can't find a part number or source. 2) Can transmission be used with a missing spring? Thanks

 

[Poser]

#1 synchronizer ring.

Are you referring to first/second gear, or, are you referring to the synchronizer closest to the front of the transmission input shaft?

 

[bbace]

It is on the output shaft. FSM references it as the "synchronizer ring no. 1 subassy"

 

[bbace]

Pics

Here are some photos. One is of the spring clip and the other shows the synchro ring.

 

[cruisernerd]

is it my inagination or is there a couple of teeth missing from the gear furthest right? just above middle.

 

[bbace]

No. All the gears are in good condition. Not a great picture.

 

[Poser]

It appears that it could be part of #10 in the picture below from

Marvs web site... <---- this is a link


(Third and fourth gear synchronizer hub spring clip retainer. )



I would give Marks Off Road <---- this is a link

a call and see if he has any of the parts you are looking for.