GSMTR parts swap?

[dragr1]

If anyone needs any stock parts from '85 and '86 4runners, I have a bunch of parts and will be coming to GSMTR. I'll try to get a complete list up in the next couple of days if there is any interest.

 

[greenseaman]

I might be able to use some parts for an 85 4runner. Let me know what ya got!

 

[dragr1]

I might be able to use some parts for an 85 4runner. Let me know what ya got!

Anything in particular? Most of the interior is gone, I still have some dash pieces though. Engine is gone along with the ecu and radiator. I'll be keeping the trans., transfer case, and driveshafts. Still has mint condition doors, rear hatch, fenders, top, and hood. Actually have 2 tops and 2 hoods, one set is brown/silver color (not factory) and the other set is red. The red set is off the '86 and is in great shape, but the '85 stuff is near mint. I have some taillights, front corner lights, couple of grills, front bumper (corner pieces missing). Both the '86 and '85 have complete factory suspension intact. The '85 has both axles intact and steering. The '86 has front diff, one cv, and rear housing with shafts, but no third. Still working on the complete list.

 

[Trollhole]

If anyone needs any stock parts from '85 and '86 4runners, I have a bunch of parts and will be coming to GSMTR. I'll try to get a complete list up in the next couple of days if there is any interest.

Great idea. I'm already hauling some stuff up for other people. As well I have stuff for the TLCA Raffle Build.

 

[CID 96]

tires and rims

Set of 5. Tires and rims. These are five lug and fit all 100 series LCs. Take offs from new 79 series mine trucks. Tires are 16.00 x 7.50 and wheels are 16".

Let me know of any interest and I will bring to GSMTR for you. Asking $400 for all 5 tires and rims.

Sid

 

[greenseaman]

You don't have the back plates that cover the tailgate do you? I need the metal plate and the trim piece that covers the interior. It covers up the glass and all the gears and stuff...for an 85 4runner. Thanks, Scott

 

[dragr1]

You don't have the back plates that cover the tailgate do you? I need the metal plate and the trim piece that covers the interior. It covers up the glass and all the gears and stuff...for an 85 4runner. Thanks, Scott

I sold one of those, not sure if I have another but I will look this weekend when I go out to where it's stored at.

 

[dragr1]

Parts from '85 and '86 4runners:

One red hood-good condition
One red top-good condition
2 red front fenders-one has a little rust, both have small holes from flares
One tan hood-excellent condition
One tan top-excellent condition
1 black front bumper with turn signals, no corner pieces
2 tan front fenders-excellent condition
2 tan doors-excellent condition
1 tan rear door w/glass-excellent condition
1 front chrome grill
1 front black grill
1 front drivers side corner light chrome trim
1 factory rollbar
1 front skidplate
1 gas tank skidplate
1 instrument cluster-from automatic, no tach
3 tan gloveboxes
3 tan large main dash piece
Several different washer fluid bottles of different shapes and sizes
2 tan lower dash pieces
2 tan instrument cluster surround dash pieces
1 auto shifter
1 rear seat heater-coolant tubes bent
Several dash clocks
Lots of other misc. dash pieces from vents to cubby holes-all are tan
A/C dash controls
Lots of switches and buttons
2 a/c compressors-unknown condition, were sealed though
Few a/c hoses
Lots of dash hvac plastic tubing
Mass air meter from '86 22re auto-unknown condition
Tan/olive cloth backseat
Air tank that bolts into factory location for spare tire on 1st gen 4runners
Stock steering setup from solid axle mini truck
Rear springs from '86 4runner
IFS width rear axle housing
IFS width rear axleshafts w/brakes-brakes likely no good
IFS front diff from '86-unknown condition or gear ratio, was from 22re auto
Front and rear springs from '85 4runner
Rear complete axle from '85 4runner
Front complete axle from '85 4runner
Stock steering setup from '85 4runner
Stock steering box from '85 4runner

Stock rear panhard bar from '97 4runner
Stock black SR5 mudflaps from '96-'02 4runner


I'm sure there is other stuff that I have missed. Most of this is still on the 2 rigs, so I will need time to pull it before the event. So if you want something let me know so I'll have time to get and for us to work out a price.

Willing to negotiate a price on this stuff so make offers!

 

[dragr1]

Also looking for someone to haul some seats from the Louisville, KY area to the event if possible.

 

[greenseaman]

Got a pic of the auto shifter? The overdrive button is broke on mine. At least I think that's what it is... It has had a c- clamp on it since I've had it. I may take it off your hands!

 

[dragr1]

Got a pic of the auto shifter? The overdrive button is broke on mine. At least I think that's what it is... It has had a c- clamp on it since I've had it. I may take it off your hands!

 

[greenseaman]

How much do you want for the shifter? I might be able to use that!

 

[dragr1]

How much do you want for the shifter? I might be able to use that!

How about $30

 

[dragr1]

Also looking for one of the flat panels that covers where the rear seat is from a 1st gen 4Runner. Anyone have one?

 

[Southeast Overland]

I'll have an almost new 5/16x100' Warn wire cable and a new Warn roller fairlead. $50 each.

 

[71-CRUISER]

I need a FJ40 "chrome horn" if anyone has a spare they want to sell.

 

[greenseaman]

I'll take the shifter.Thanks, Scott

 

[dragr1]

I'll take the shifter.Thanks, Scott

Great! I'll be in a white/silver Suburban towing this:

 

[greenseaman]

I'll see ya there in a red 85!

 

[dragr1]

Also have:


15x8 black steel wheel, pretty sure backspacing is 3.75, basically new wheel, used to be my spare before I went to 17's $35

205/75/15 radial trailer tire-load range C-also basically brand new, has maybe 100 miles on it, was my trailer spare until I went to 225 tires $40