Disclaimer:
OK-I am not a metal fabricator. nor I am not in the business. And I am not particularly interested in doing this for a profit ( I would expect a some compensation for my involved time like set up packaging and shipping) I am still in the process of getting the parts I need to finish this project, so this is as good a time to see if you would be interested to be added to the list. You would have to be flexible as to the finished design/product based on what I intend to do. (read bellow.)
I am working with a local welder to make me a Tire Carrier that mounts on the OEM Bumper and would copy closely Zane and Johnny Lange aka wildyoats design...Wild Yoats Toyota
Really there is not much to it, but some cutting and welding, then painting of course. I am willing to work with my local welder to make more quantities if others here are interested.
Parts needed:
8 ft of 2x2 3/16" metal $tdb
Some 3/16" plate metal $tbd
Locking 2000 pound latch ($50 shipped) Mcmaster #5071A62 or similar
locking bumpstop pin ($20 shipped) Mcmaster #90222A69
Rocklogic IPOR Spindle ($50-60 shipped)
Some bolts and tire wheel nuts ($30)
1 3/4" hole saw bit
labor: About 8 hours $tbd
Total Cost Target is $500-$550 dollars.
The idea is to make it Bolt on...so all you need is to bolt it on, and not be afraid to drill a hole in your bumper..
OK-I am not a metal fabricator. nor I am not in the business. And I am not particularly interested in doing this for a profit ( I would expect a some compensation for my involved time like set up packaging and shipping) I am still in the process of getting the parts I need to finish this project, so this is as good a time to see if you would be interested to be added to the list. You would have to be flexible as to the finished design/product based on what I intend to do. (read bellow.)
I am working with a local welder to make me a Tire Carrier that mounts on the OEM Bumper and would copy closely Zane and Johnny Lange aka wildyoats design...Wild Yoats Toyota
Really there is not much to it, but some cutting and welding, then painting of course. I am willing to work with my local welder to make more quantities if others here are interested.
Parts needed:
8 ft of 2x2 3/16" metal $tdb
Some 3/16" plate metal $tbd
Locking 2000 pound latch ($50 shipped) Mcmaster #5071A62 or similar
locking bumpstop pin ($20 shipped) Mcmaster #90222A69
Rocklogic IPOR Spindle ($50-60 shipped)
Some bolts and tire wheel nuts ($30)
1 3/4" hole saw bit
labor: About 8 hours $tbd
Total Cost Target is $500-$550 dollars.
The idea is to make it Bolt on...so all you need is to bolt it on, and not be afraid to drill a hole in your bumper..