For Sale FZJ80 Rear E-locker 9.5" (2 Viewers)

[Rock Crusher]

I have a rear e-locker from a 1996 Land Cruiser in good condition. Bearings turn smooth, actuator motor engages and disengages smoothly. 4:10 gears 9.5" ring gear. 213XXX miles. Street and highway driven. Gear oil still really clear when removed. $600.

 

[Fast Eddy]

Whole rear-end or just the diff?

 

[Rock Crusher]

Just the Diff. Location: KC, MO

 

[rlrajanant]

will it suit FJ60 rear? also has 9.5" differential if yes i can take it.

 

[tucker74]

will it suit FJ60 rear? also has 9.5" differential if yes i can take it.

It will fit but won't work for a 60 rear unless you have a full-floater, it will work up front if you notch the housing for the actuator

Tucker

 

[dr_claw]

Does this also need longer splines on the axle shaft?

 

[YotaOFFroad27]

Any chance you have the housing, and willing to sell parts off it?

 

[Roxx]

Double post

 

[Roxx]

Pm sent

 

[Rock Crusher]

E locker

Any chance you have the housing, and willing to sell parts off it?

I might be able to get the housing. What parts are you looking for?

 

[Rock Crusher]

I can't be sure if it will fit a FJ60. You will need to do the research to find out.

 

[YotaOFFroad27]

I might be able to get the housing. What parts are you looking for?

I need both backing plates, they need to be in useable condition...

 

[Rock Crusher]

Sorry! The backing plates are already gone

 

[YotaOFFroad27]

Sorry! The backing plates are already gone

shoot.. seems to be a common story.. Thanks for checking!

 

[cody c]

You'll need long splined shafts for that to work in any other diff. That will bolt in a 60 series diff with mods on a FF axle or front axle but you will need the axleshafts replaced or modified.

 

[Rock Crusher]

Fzj80 rear 9.5' elocker and 8" high-pinion elocker

I now have a 1998 Fzj80 9.5" rear e-locker and a 8" High-pinion front e-locker.

Both in great shape, 4:10 gears, actuator works well and bearings turn smooth. Gear oil in both diffs was clear when removed. Harnesses with both. $600.00 Each

 

[Borick]

Is the rear locker different from the one you originally posted, or did you mix up the year ('98 vs. '96)?

Where are you located?

 

[Rock Crusher]

Yes, Its a mistake. They are both from a 1996. I am located in Liberty, MO 64068

 

[Fast Eddy]

You'll need long splined shafts for that to work in any other diff. That will bolt in a 60 series diff with mods on a FF axle or front axle but you will need the axleshafts replaced or modified.

You just need the long-splined long side if you're putting it into the front, or the long-splined short side if you're putting it into a full-floating rear end.

 

[Borick]

PM'd you.