Front discs hanging up, trying to get from CT to FL help please!

[yodafrick]

Did 4 runner caliper conversion on 85 fj60. Front discs are hanging up and heating up pretty bad. Thinking something is up with the proportoining valve but I thought that would have more to do with the rear brakes.
I know the master is supposed to be a 1" bore but I didn't do the conversion so I'm not sure it's right. I don't see a 1 on it anywhere to designate the bore size.
Would I be able to run the stock 60 m/c and just have squishy brakes until I can get the correct m/c.
The truck drives fine up to about 55 mph then develops a harsh vibration. Could this vibration be unrelated to the brakes?
The rotors were supposed to be replaced with new but were not so I'm wondering if the new pads are just rubbing on the old worn rotors and causing this vibration?
Swapped everything from a working system on another 60 except for the proportioning valve and problem still persisted.
any help would be much appreciated because I need to get home!!!

 

[yodafrick]

All fixed and he's on his way! It was the proportioning valve. P.S. Al, past the Mason/Dixie he's all yours!

 

[lowtideride]

I called him a lil while ago...but no answer...I hope all is well. I'm stoked for him to have a running cruiser agian.

I just got done wiring up the 8274 I used the lawn orniment 80 for winching practice. Call me if he needs any help...

If could just tell him to wait at tellico and ill be there in 7 days

 

[yodafrick]

ummm reinstalling missing return spring helps alot with preventing brake hangup...

 

[lowtideride]

Bwhahaahaha....that will be 50 bucks.