Free shop day on your truck today.

[Trollhole]

If you are reading this today most likely you are bored. I’m at the shop today and the outside lift is open. If you want to use it to rotate tires, change oil or brake or whatever else it’s here. I’m here for most of the day. So come on. Text me and let me know you are coming.

You can use my gear oil pump and whatever else tools and supplies I have as long as you replace them. This is not a regular thing I normally do.

8644140563

 

[CharlestonG8R]

If you are reading this today most likely you are bored. I’m at the shop today and the outside lift is open. If you want to use it to rotate tires, change oil or brake or whatever else it’s here. I’m here for most of the day. So come on. Text me and let me know you are coming.

You can use my gear oil pump and whatever else tools and supplies I have as long as you replace them. This is not a regular thing I normally do.

8644140563

Clearly we need to relocate to Greenville.

 

[the gimpey one]

Wish I wasn't so busy. Need to look at front end among other things!

 

[BJJCruiser]

This is awesome. If I wasn't painting my kitchen today I'd be there just to hang out and help.

 

[mmcinnis]

If you are reading this today most likely you are bored. I’m at the shop today and the outside lift is open. If you want to use it to rotate tires, change oil or brake or whatever else it’s here. I’m here for most of the day. So come on. Text me and let me know you are coming.

You can use my gear oil pump and whatever else tools and supplies I have as long as you replace them. This is not a regular thing I normally do.

8644140563

Damn. Busy today!

 

[JToobe]

It was pretty much a Cruiser day unexpectedly. Got a text early from @yamaguchigumi that he was doing some PM on his son's FJ60...of course I wanted to learn how to change diff fluid and grease the drive shafts, etc.! While there got text from @Trollhole that the shop was open. After visiting with youngest daughter who had come home from Spring Break and running a few errands with the lovely wife, of course I am attracted to Trollholes like a moth is attracted to a light! Did some repairs on the ARB bumper that is going on the White 100 series this week and was a gopher for anyone that needed some help. Some shots from the day:

 

[Bryanseye]

Thanks for this @Trollhole and thanks for the assistance too @IcutYourCruiser.

My plan didn’t work out but discovering/repairing the broken sway bar link made it a successful trip for sure. You made a fine gopher @JToobe

Meanwhile at home, or I would have been by sooner:

 

[JToobe]

That for this @Trollhole and thanks for the assistance too @IcutYourCruiser.

My plan didn’t work out but discovering/repairing the broken sway bar link made it a successful trip for sure. You made a fine gopher @JToobe

Meanwhile at home, or I would have been by sooner:

View attachment 1656393

So you got bearings done on Sequioa and back home?

 

[Bryanseye]

So you got bearings done on Sequioa and back home?

Neither. But we learned a lot.

 

[dbenke]

@CharlestonG8R
Don't you have a lift you can use in Mt. P.??

 

[CharlestonG8R]

@CharlestonG8R
Don't you have a lift you can use in Mt. P.??

I know of one but it's heavily guarded by a Chick'n... Also, that's a long haul in the HJ45 at the moment; need to get a few things done on it. I have jack stands, a jack, and breaker bars... might need your cutting torch, though!