This is an odd-ball request, I know, but do you have any Snapper self-propelled push mower parts? In particular, I'm interested in finding one of their dethatchers... Thanks!
For Sale / Wanted To Buy (3 Viewers)
- Thread starter ClemsonCruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
This is an odd-ball request, I know, but do you have any Snapper self-propelled push mower parts? In particular, I'm interested in finding one of their dethatchers... Thanks!
I need a bagger for a YTH model Husq. riding mower if you have anything by chance. Long shot probably, but thought I'd ask.
Jeremy
Jeremy
dohcdelsol93
snoogans
This is an odd-ball request, I know, but do you have any Snapper self-propelled push mower parts? In particular, I'm interested in finding one of their dethatchers... Thanks!
I've seen thatcher attachements for snapper riders but this was years ago. IIRC they have not made them in many years. As for the thatcher attachments for push mowers i have heard of the type that attached to your blade, or were part of a blade but i've never seen one.
Don't have anything for an older John Deere 300 series lawn tractor do ya? Looking for bagging equipment or the mulching close off for the deck....
dohcdelsol93
snoogans
the only bagger parts i have are a few mis parts for snapper bagger systems on the rear engine riders.most of what i have are old rear engine riders (snapper) and a few trimmers and lots of junk chain saws.
dohcdelsol93
snoogans
The only John Deere parts i have is a deck (the last time i checked it was still around back) It's a 42 or 46" deck. I have no idea what series it came off, it just kind of appeared one day. There was no mulching chute on it. I'm a snapper/simplicity dealer. Although i do work on John Deere equipment i collect more of the equipment i sell/see more often. I have a few Simplicity, Murray and more than a few snapper riders that have good parts on them. I also have an MTD.I don't have much in the range of push mowersI have lots of poulan chainsaws, some older stihl saws and a few husky saws. Aso have some craftsman and homelight junk saws.I have boxes of misc used/sharpened chains.I have some home light/ehco and craftsman chain saws.I have a husky hand held blower that only needs a carb and some missing a/f parts to run right.I have some junk stihl br400/420 blowersa few shindiawia blowers and trimmer parts.I have some older stihl trimmer parts.
This is an odd-ball request, I know, but do you have any Snapper self-propelled push mower parts? In particular, I'm interested in finding one of their dethatchers... Thanks!
The one that clips to the front axle or the way old "spring" on the blade style? I believe I have the blade style but will have to dig around some.
What about Stihl/Husq chainsaws that might need some love to get back to work?
Thanks,
Scott
Thanks,
Scott
dohcdelsol93
snoogans
I have some that will require new pistons/cylinders, not really worth repairing IMHO.
They are better for parts for a running saw(carbs/coils/handles/fuel tanks/etc)
Snappers had the one that clipped to the front axle, that's what I'm looking for. Thanks, though!
PIAA Lights 4 Sale
I have two sets of Piaa lights for sale. I have new in the box a set of 510 fogs with yellow bulbs for $160.00. I also have a used set of 520 ATP (all terrain pattern) that are roughly six months old. The 520's do not have a wiring harness with them but do have the factory connectors on the lights. I am asking $100.00 for these. If anyone wants both sets ill take $250 for both.
I have two sets of Piaa lights for sale. I have new in the box a set of 510 fogs with yellow bulbs for $160.00. I also have a used set of 520 ATP (all terrain pattern) that are roughly six months old. The 520's do not have a wiring harness with them but do have the factory connectors on the lights. I am asking $100.00 for these. If anyone wants both sets ill take $250 for both.
- Joined
- Apr 24, 2008
- Threads
- 188
- Messages
- 2,873
- Location
- Conway, SC
- Website
- www.lowcountrylandcruisers.com
OME 864 for sale
I've got a set of new OME 864 springs that I got with a lift for my 80 for Christmas that I might wanna sell for $50. They will fit an 80 or 100(I think). They are the severe duty springs that will hold like 880 lbs to GVW. I'm in conway now. Will ship but it'll probably be about $30...
I've got a set of new OME 864 springs that I got with a lift for my 80 for Christmas that I might wanna sell for $50. They will fit an 80 or 100(I think). They are the severe duty springs that will hold like 880 lbs to GVW. I'm in conway now. Will ship but it'll probably be about $30...
4 goodyear wranglers for sale or trade
GoodYear Wrangler RT/S 265/75/16 set of four....balance out great, smooth ride (for those of you looking for a blacktop drive). Gotta be at least 10K left in them retail $175 each...sell the set of four for $200!
Or trade for intersting items....????
reach me at fullybalanced at aol dot com
GoodYear Wrangler RT/S 265/75/16 set of four....balance out great, smooth ride (for those of you looking for a blacktop drive). Gotta be at least 10K left in them retail $175 each...sell the set of four for $200!
Or trade for intersting items....????
reach me at fullybalanced at aol dot com
WTB - 4 speed and case from late 70's FJ40
I'm in need of a 4 speed transmission and transfer case. I purchased one for the project, but found it to be in worse condition than first observed.
Ping me at seriesLR(at)gmail(dot)com if you can help.
Thanks,
Jim
I'm in need of a 4 speed transmission and transfer case. I purchased one for the project, but found it to be in worse condition than first observed.
Ping me at seriesLR(at)gmail(dot)com if you can help.
Thanks,
Jim
dohcdelsol93
snoogans
I have a complete transfer case removed and taken apart for inspection out of my 86. My tranny came with one so it's collecting dust. If you find a tranny with no tc make me an offerI'm in need of a 4 speed transmission and transfer case. I purchased one for the project, but found it to be in worse condition than first observed.
Ping me at seriesLR(at)gmail(dot)com if you can help.
Thanks,
Jim
Warn 8274 solenoid cover/s
Warn 8274 solenoid cover/s
I bought a 4 pack of these from the Awl_TEQ (Kevin), have 2 left. $31 each (+~ $5-6 for shipping if not local Charlotte area). PM or e-mail: gabe4jlc at gmail dot com
Thanks,
Gabe
![mail[1].webp](https://forum.ih8mud.com/attachments/mail-1-webp.481129/ "mail[1].webp")
Warn 8274 solenoid cover/s
I bought a 4 pack of these from the Awl_TEQ (Kevin), have 2 left. $31 each (+~ $5-6 for shipping if not local Charlotte area). PM or e-mail: gabe4jlc at gmail dot com
Thanks,
Gabe
Since it doesn't look like I'm going to get around to building my rear bumper this year, I'm looking for a Reese hitch (2" tube) for my FJ60. Let me know if you have one taking up space that you want to get rid of.
Will one off of a 62 fit a 60?
I think so, but let me do the research and I'll get back with you.
- EDIT - Looks like it should fit. What do you want for it, and is it off? Could I come by and look at it?
Last edited:
- Joined
- Apr 21, 2005
- Threads
- 121
- Messages
- 558
- Location
- Charleston, SC
- Website
- www.charlestonwatertaxi.com
Selling or Trading the diesel. Please pass it on to anyone who may be interested. Thanks Guys
https://forum.ih8mud.com/vehicles-t...le-trade-89-62-built-w-2h-diesel-h55f-sc.html
https://forum.ih8mud.com/vehicles-t...le-trade-89-62-built-w-2h-diesel-h55f-sc.html
