duzint look like a donut...
LOL - I'll take it!
Too bad I didn't ask earlier b/c I could have picked it up Sunday when I was looking for trouble in the snow.
For Sale / Wanted To Buy
- Thread starter ClemsonCruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
LOL - I'll take it!
Too bad I didn't ask earlier b/c I could have picked it up Sunday when I was looking for trouble in the snow.
Isn't a stock 40 tire like 28.5" tall?
Jeremy
Jeremy
Yes, yes it is... However it is vintage and in excellent condition... H78-15 is the size to be exact...
Steve, why not just use a large inner-tube if its just for display?
I wanna put stuff in the Trasharoo and strap stuff on the outside so it will need to hold some weight.
It's gonna be covered by a Trasharoo - so it might not be the best option.
I just want it out of my house, I am getting another tire to use as a spare from Dbenke, so I won't have room for it. No problems....
FJ Cruiser OEM roof rack from a 2007. Is in good shape - has typical wear (fading, etc).
$200
Pick up or MUD ship
Located in Travelers Rest SC. I travel to Seneca SC frequently.
$200
Pick up or MUD ship
Located in Travelers Rest SC. I travel to Seneca SC frequently.
WTB: Seats 74 FJ40
Does anyone have or know of any OEM seats to fit a 74 FJ40? I think 73-78 seat frames are the same, correct me if i'm wrong.
Does anyone have or know of any OEM seats to fit a 74 FJ40? I think 73-78 seat frames are the same, correct me if i'm wrong.
I came across some tires, A bunch of tires actually. Heres what i have in 16's. PM me if you are looking for 15's 17's or 18's.
They are all BRAND NEW and can be mounted and balanced if you want to drive to me.
LT285/75/16 Mud Star 8 ply $710 for four (NEW)
Dont worry about the Mac's Tire sign, got the pic off google images lol.
LT285/75/16 Cooper Discoverer SST 8 ply $920 for four (NEW)
LT315/75/16 Mud Claw M/T $800 for four (NEW)
AND
LT315/75/16 Kumho Mohave $660 for four (NEW)
And like i said, i can get alot more in 15's 17's and 18's so PM me if your interested.
Hope i can help!
Ryan
They are all BRAND NEW and can be mounted and balanced if you want to drive to me.
LT285/75/16 Mud Star 8 ply $710 for four (NEW)
LT285/75/16 Cooper Discoverer SST 8 ply $920 for four (NEW)
LT315/75/16 Mud Claw M/T $800 for four (NEW)
AND
LT315/75/16 Kumho Mohave $660 for four (NEW)
And like i said, i can get alot more in 15's 17's and 18's so PM me if your interested.
Hope i can help!
Ryan
Baja Rack FJ Cruiser OEM Basket
I have a slightly damaged FJ Cruiser OEM rack by Baja Rack for sale. There is a small dent on one of the rack main bars. It is very small but I don't feel right selling it as new @ full price.
MSRP is $375. Damaged price is $325. THIS PRICE CANNOT BE COMBINED WITH ANY COUPONS OR DISCOUNTS. If I didn't tell and show you where the dent is you probably wouldn't see it but I have to feel 100% about all of my transactions.
Fits Toyota FJ Cruisers from 2007 - 2010. This is a one piece rack and installs inside of stock rack. Adds functionality and versatility to the factory rack without adding height to the vehicle.
Frame: 1” (25.4mm) and 1/2’’(12.7mm) Steel tubing
Top Wind Deflector: .062” (1.57mm) 5050-H32 Aluminum
Finish: Zinc primer with black powder coating
Rack weight: 32 Lb (14.51Kg)
Weight Capacity: 200Lb (90 kg)
Measurements: 38” (965.2 mm) front Width , back width 36”(914.4 mm),Long x 48”(1219.2 mm), High 5.25”(133.35 mm).
Mounting method: Set of Clamps (4 Total).
SEO Store | Southeast Overland
I have a slightly damaged FJ Cruiser OEM rack by Baja Rack for sale. There is a small dent on one of the rack main bars. It is very small but I don't feel right selling it as new @ full price.
MSRP is $375. Damaged price is $325. THIS PRICE CANNOT BE COMBINED WITH ANY COUPONS OR DISCOUNTS. If I didn't tell and show you where the dent is you probably wouldn't see it but I have to feel 100% about all of my transactions.
Fits Toyota FJ Cruisers from 2007 - 2010. This is a one piece rack and installs inside of stock rack. Adds functionality and versatility to the factory rack without adding height to the vehicle.
Frame: 1” (25.4mm) and 1/2’’(12.7mm) Steel tubing
Top Wind Deflector: .062” (1.57mm) 5050-H32 Aluminum
Finish: Zinc primer with black powder coating
Rack weight: 32 Lb (14.51Kg)
Weight Capacity: 200Lb (90 kg)
Measurements: 38” (965.2 mm) front Width , back width 36”(914.4 mm),Long x 48”(1219.2 mm), High 5.25”(133.35 mm).
Mounting method: Set of Clamps (4 Total).
SEO Store | Southeast Overland
Last edited:
Bucket preferably but open minded right now, what ya got?
Bob,these are for my buddy and I've forwarded it to him. What's your price?
80 series OME Lift
Hey all,
I have a med/hvy lift kit for TLC 80 series. This kit has apx. 50k on it, very minor towing or off-road. When I used the lift, I had a 1in. spacer in the front with a TJM and 8000lb winch and the car sat near level, but slightly higher in the rear (The best look IMHO). I'm asking $200 for it (springs only), and will be traveling through Columbia, Greenville, and Charolette this weekend if anyone would like to meet and save on shipping costs. I will check on Ih8mud, but the best way to contact me is by email. Wkastler@gmail.com Thanks for lookin
Hey all,
I have a med/hvy lift kit for TLC 80 series. This kit has apx. 50k on it, very minor towing or off-road. When I used the lift, I had a 1in. spacer in the front with a TJM and 8000lb winch and the car sat near level, but slightly higher in the rear (The best look IMHO). I'm asking $200 for it (springs only), and will be traveling through Columbia, Greenville, and Charolette this weekend if anyone would like to meet and save on shipping costs. I will check on Ih8mud, but the best way to contact me is by email. Wkastler@gmail.com Thanks for lookin
It's the time of year that we are cleaning out the shop for spring inventory. If your looking for any used small engine parts (chainsaws/blowers/lawnmowers) let me know and i'll get with the boss man on getting you a price. A lot of this stuff will go to the trash or scrap yard if not sold so the prices on these parts are cheap. Again, this is just parts. I don't have much of an inventory of "used" equipment but i do have a lot of equipment that has burnt up/bad engines and lots of good parts.
we also have a ton of chain saw chains that were dropped off for sharpenings and were never picked up. these chains are sharp, many have very little use and are ready to be thrown on and put to use. $8 bucks a piece for any size, willing to ship small parts on your dime using USPS.
we also have a ton of chain saw chains that were dropped off for sharpenings and were never picked up. these chains are sharp, many have very little use and are ready to be thrown on and put to use. $8 bucks a piece for any size, willing to ship small parts on your dime using USPS.
Last edited:
Ok, I'll let him know and I'll get back to you