Fj moneypit
Cubic Zirconia Member
May be interested in these. how many miles on them? Do you know how much weight they’ll hold? I’m pretty loaded down. Thanks.
For Sale / Wanted Thread (1 Viewer)
- Thread starter Isotel
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Anyone have a set of 5x150 18 wheels, preferably OEM for a 2006 LC? Previous ownder put 20" Sequoia wheels on it and need them gone. Also I have 20" Sequoia wheels if anyone is interested.
you still have fan and floor mats?
Selling my 1975 FJ-40, shown in my sig. image. You can view the entire ad with images on Craigslist here:
Here are a few features:
Thank you, Vic
1975 Toyota FJ-40 for sale - cars & trucks - by owner - vehicle...
I’ve owned this FJ-40 since 1987 and decided to sell it because I need a larger rig to accomodate more people. It has been reliable and is extremely capable on the trail. The body is mostly sound...
cosprings.craigslist.org
- 1988 5.7l Chevy TBI
- Muncie 465 transmission with 6.55 low ratio. 168 tooth Chevy truck flywheel
- Original transfer case, rebuilt 3 yrs ago
- Saginaw power steering with Blazer tilt column
- New front fenders, professionally painted, not yet installed
- Full 6-point roll cage installed by Redline Land Cruisers
- 4-link coil spring rear suspension
- 4” Skyjacker Softride front leaf springs
- Warn model 8274 winch in good operating condition
- Front and rear ARB air lockers
- York belt-driven air compressor; airs up tires and operates the ARBs and impact wrench
- Blah, blah, blah
Thank you, Vic
Posting up here that I am in the market for a 60 series in good shape. Up in Silverthorne but able to travel anywhere in CO or neighboring states for the right deal. Looking for a good candidate to put some money into.
For Sale:
FZJ80 transmission. Came out of a '94. Pulled for a V8/tranny swap. No issues that I'm aware of, but also not the original owner. Came with the engine that isn't for sale, but is still connected to it. Will need to separate.
Comes with the coolant lines, dip stick/tube, and NSS.
No transfer case.
Local pickup only - in Colorado Springs.
Asking $500 obo
FZJ80 transmission. Came out of a '94. Pulled for a V8/tranny swap. No issues that I'm aware of, but also not the original owner. Came with the engine that isn't for sale, but is still connected to it. Will need to separate.
Comes with the coolant lines, dip stick/tube, and NSS.
No transfer case.
Local pickup only - in Colorado Springs.
Asking $500 obo
That's actually from a 93, which is OBD1
LAST CALL - For Sale:
Rhino Rack Roof Rack
No longer available welded-rail, brand new, and stout.
Fits an 80 series using crossbars, recommend rain gutter mounts.
72 x 56 (could be an inch more or less, been a while since I measured it).
Identical to the one on my 80, just a smidge larger in both dimensions.
Asking $600, retails for far more.
Rhino Rack Roof Rack
No longer available welded-rail, brand new, and stout.
Fits an 80 series using crossbars, recommend rain gutter mounts.
72 x 56 (could be an inch more or less, been a while since I measured it).
Identical to the one on my 80, just a smidge larger in both dimensions.
Asking $600, retails for far more.
Sold.
I’m selling this fj62 in boulder or Nederland Colorado.
1988 Toyota Landcruiser
154k miles. This is accurate as Ive had this truck since about 2000 with under 100k miles. I installed all the 4x4 parts, ARB bull bar, warn winch, ome shocks and leaf springs back and front, custom rock sliders, 33 inch tires and the super cool magnesium rims and a Kaymar rear bumper. It still runs great, of course, motor is strong and transmission shifts fine. I just changed the transmission fluid to synthetic, flushing the system. Has minimal rust, some on right fender you’ll see in picture and few surface spots here and revere. Frame has virtually no rust. Just slight surface rust that is inconsequential. Almost no miles were put on it for over a decade, only driven a few times a year to make sure it doesn’t just sit. It was in a small accident that pushed the bull bar in and broke the headlight bezel. I will include the parts to fix it, I bought them already. It needs a new windshield which I priced at $350 so this will be considered. I can do it, or we can talk price. I figured if someone wants to really clean it up, you should do the windshield after the body work. I’ve seen some ridiculous prices for these, I’m not going to go there, I know there’s some work to do to make this sweet, but it does have all the best 4x4 parts for it already. $10,000 is what I’m thinking. Let me know if you’re interested and I’ll post more pics. Thanks
I’m selling this fj62 in boulder or Nederland Colorado.
1988 Toyota Landcruiser
154k miles. This is accurate as Ive had this truck since about 2000 with under 100k miles. I installed all the 4x4 parts, ARB bull bar, warn winch, ome shocks and leaf springs back and front, custom rock sliders, 33 inch tires and the super cool magnesium rims and a Kaymar rear bumper. It still runs great, of course, motor is strong and transmission shifts fine. I just changed the transmission fluid to synthetic, flushing the system. Has minimal rust, some on right fender you’ll see in picture and few surface spots here and revere. Frame has virtually no rust. Just slight surface rust that is inconsequential. Almost no miles were put on it for over a decade, only driven a few times a year to make sure it doesn’t just sit. It was in a small accident that pushed the bull bar in and broke the headlight bezel. I will include the parts to fix it, I bought them already. It needs a new windshield which I priced at $350 so this will be considered. I can do it, or we can talk price. I figured if someone wants to really clean it up, you should do the windshield after the body work. I’ve seen some ridiculous prices for these, I’m not going to go there, I know there’s some work to do to make this sweet, but it does have all the best 4x4 parts for it already. $10,000 is what I’m thinking. Let me know if you’re interested and I’ll post more pics. Thanks
Last edited:
Selling RedArc 2410 BCDC.
See ad here:
forum.ih8mud.com
See ad here:
For Sale - CO Springs, CO/Laramie, WY - REDARC2410 BCDC
Selling a REDARC2410 BCDC - this is a 9-32V to 24v converter/charger. It is the predecessor to the 2420BCDC. Looks just like the 2420, only 2 differences: 1) it charges at 10Amps instead of 20Amps 2) it does not contain the MPPT solar controller. I used it for about 2yrs to charge a 24v cabin...
forum.ih8mud.com
For Sale:
4 - 17" V8 4Runner Wheels with a couple roller tires
See ad here:
4 - 17" V8 4Runner Wheels with a couple roller tires
See ad here:
**LAST CALL** Wheels and tires - auto wheels & tires - by owner -...
4 - V8 4Runner Sport wheels w/TPM sensors and center caps - 17" x 8 6-lug - Fits Toyota, Chevy, Ford, Mitsubishi, Mazda, - Good condition overall, true, not bent - Minor scuffs here and there 3 -...
cosprings.craigslist.org
COS80
SILVER Star
- Thread starter
- #1,174
Anyone need a 1F core? This overheated but it spins free, as is $200
What makes this a non winch bumper? Looks like it has cutouts for a winch and fairlead?
COS80
SILVER Star
A winch will not fit. I tried 2, including the Engo recommended by NWTI, and they both hit the trans cooler.
So it sounds like it could possibly be used with a winch if one wanted to do some extra work. I am just saying this because I had to relocate my trans cooler I little bit higher when I fabricated my bumper.
COS80
SILVER Star
Possibly, but thats entirely on the next owner to sort out.
Fj moneypit
Cubic Zirconia Member
Good deal on that bumper. Wonder if my smittybuilt will fit. It’s just odd that a winch won’t fit. Curious of inside dimensions.
