I went to a dad-daughter summer camp a few years back with Paige. They had a bunch of Alpacas there. They also had a big, white fluffy dog that basically lived with the alpacas. I wonder if it was a Great Pyrenees, keeping predators away from them.
For Sale @ High Desert Cruisers (14 Viewers)
- Thread starter Ruadhrigh
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Bumping for new camping season... and other life events... anyone looking for a nice, very lightly used camper?
Reluctantly considering selling my A-liner classic with offroad/expedition package... gauging interest. We bought it new in 2013, lives under a tarp when rarely in use. Great camper, I pull it behind the 4runner with no trouble, 80mph up la bajada. I bought it to pull behind my 80 when i had that and it was easy peasy, 1687# reported dry weight. Has a/c, heater, 11 gal fresh water, no grey water. hot/cold water, outside shower, sink, fridge, microwave. queen bed and dinette that makes a twin bed. I replaced the battery and the bias ply tires with carlisle radials last summer.
We just don't use it enough anymore to justify storing it. it is currently winterized and stored in my backyard.
behind the 80...
this was ouray last year. it's only trip of the year
Cost, yeah, need to consider that still... don't want to rip either of us off.
Mauser
Supporting Vendor
Tank5
SILVER Star
I am looking to trade these 17" rims for another set of 17" rims that will fit either on my 80 or 45. These came on my 80 series and I don't love them. I honestly don't have anything specific in mind so let me know what you have if you are interested. I have 5 of them with 35x12.50r17 tires.
Edit: 4/8/19, I went and measured the tire tread depth. They are all right at 10/32, new the tires would be 18/32, so they still have a little over half the tread depth. I would prefer to sell the wheels and tires together, so there are 5 rims and 5 tires asking 1200 for it all. Let me know what you think.
Edit: 4/8/19, I went and measured the tire tread depth. They are all right at 10/32, new the tires would be 18/32, so they still have a little over half the tread depth. I would prefer to sell the wheels and tires together, so there are 5 rims and 5 tires asking 1200 for it all. Let me know what you think.
Last edited:
Dumpolina
SILVER Star
If you end up wanting to sell them I might be interested. 17X9 or? Do you know backspacing? Looks deep!
Tank5
SILVER Star
I will look and see what the back spacing is. They are either 8.5 or 9 wide, I will confirm that too. If I don't find a trade I like I will sell them after I figure out what I would buy.
Here's the specs on those wheels... they are a pretty nice wheel. I don't think the 17" version is produced any longer. I've got nothing to trade, but if you decide to sell I might be interested. What exactly do you mean by the "centers of all of them have been opened up a little"??
The 17" version was not hub-centric to begin with, IIRC, with a 108mm center bore vs 106.1 for Toyota OE wheels. If the center bores have been opened up further that would be a definite deal breaker for me.
Wheel info for reference...
FS: 16x8" Five Star Wheels - New Wheel from FN Wheels
*Please read through the pages of this thread for more photos and pictures. The latest updates are generally found on the last page of this thread.*...
www.tacomaworld.com
Tank5
SILVER Star
Here's the specs on those wheels... they are a pretty nice wheel. I don't think the 17" version is produced any longer. I've got nothing to trade, but if you decide to sell I might be interested. What exactly do you mean by the "centers of all of them have been opened up a little"??
The 17" version was not hub-centric to begin with, IIRC, with a 108mm center bore vs 106.1 for Toyota OE wheels. If the center bores have been opened up further that would be a definite deal breaker for me.
Wheel info for reference...
FS: 16x8" Five Star Wheels - New Wheel from FN Wheels
*Please read through the pages of this thread for more photos and pictures. The latest updates are generally found on the last page of this thread.*...
Thanks for looking all of that up and sharing. The center of the wheels have all had the inside ground down some. I assumed po did this to make them easier to slide on over the hubs. I will post a picture of this tomorrow.
Tank5
SILVER Star
SOLD
All the centers look like the pictures below. The centers look like they were ground a little with a Dremel or something. They were not machined. I put them on the 45 here to check fitment. They are a right fit over the front hubs.
All the centers look like the pictures below. The centers look like they were ground a little with a Dremel or something. They were not machined. I put them on the 45 here to check fitment. They are a right fit over the front hubs.
Last edited:
alia176
SILVER Star
Gadzooks, that thing needs to go to Burning Man!!!!
Thanks for clarifying. Those wheels typically have a rib running around the circumference of the center bore in that location to retain a TRD style center cap that would pop into the center bore. My guess is that the rib was interfering with fitment over the hubs so the PO ground it flat to create a flat center bore from inner edge to outer. Not a big deal, except that you can no longer run a center cap with that set. If you decide to sell, post up a price.
Tank5
SILVER Star
I am no longer looking for any trades for these wheels. I committed to buying some new steel rims. These SOLD.
Last edited:
Land Cruiser Wagon FJ60, Trade, OBO
This truck starts, runs, drives, brakes. Clean NM title. It was rolled, low-speed, on an icy downhill. It was never in a collision. The frame is straight. There are dents to the body, including to...
santafe.craigslist.org
Dumpolina
SILVER Star
If his schedule and mine align, hopefully looking at this later today. I totally shouldn’t do this but totally may.Land Cruiser Wagon FJ60, Trade, OBO
This truck starts, runs, drives, brakes. Clean NM title. It was rolled, low-speed, on an icy downhill. It was never in a collision. The frame is straight. There are dents to the body, including to...santafe.craigslist.org
alia176
SILVER Star
Oh Grant.....
You're like the rescue group for old, wayward Toyota rigs!!!
You're like the rescue group for old, wayward Toyota rigs!!!
alia176
SILVER Star
Toyota FJ40, 4Runner, FJ Cruiser Parts - $1 (Moriarty, NM)
Toyota FJ40, 4Runner, FJ Cruiser Parts
I have various parts left over from several projects that I need to sell. The donor vehicles were 1978 FJ40, 2004 4Runner and 2007 FJ-Cruiser. Too many to list, but look at the pictures. Give me a call to set up a time to look at them. All prices are reasonable and negotiable.
Toyota FJ40, 4Runner, FJ Cruiser Parts
I have various parts left over from several projects that I need to sell. The donor vehicles were 1978 FJ40, 2004 4Runner and 2007 FJ-Cruiser. Too many to list, but look at the pictures. Give me a call to set up a time to look at them. All prices are reasonable and negotiable.
- do NOT contact me with unsolicited services or offers
alia176
SILVER Star
alia176
SILVER Star
I’m selling a Toyota FJ80 landcruiser front axle. The axle has been stripped of the oem coil brackets. It is a Toyota high pinion passenger drop. Its a complete axle and has the brake calipers. Perfect for a solid axle swap.
If interested call or text, 575-9I5-6756
Asking $450
Hilux Tacoma 4Runner pickup truck offroad
Toyota FJ80 front axle Rock crawler
If interested call or text, 575-9I5-6756
Asking $450
Hilux Tacoma 4Runner pickup truck offroad
Toyota FJ80 front axle Rock crawler
