Hi im looking for a 1989 fj62 engine head in good condition in san diego area.
Thanks
Thanks
Last edited:
Wanted FJ62 ENGINE HEAD
- Thread starter TAURO75
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #3
SOME ONE CLOSER??
- Thread starter
- #4
still wanted
arcteryx
Supporting Vendor
So you want a non-cracked head in good condition? Unless you are a gambling man, that is not happening without a rebuild. The exhaust valves will be toast otherwise as every one I have had rebuilt needed new ones. You might find someone who has magnafluxed them but not rebuilt, but then you would have to rebuild it. Even then, you cannot properly magnaflux one without the valves removed.
A previous customer went through 5- repeat five- 3F heads he picked up from local SoCal junkyards before contacting me. EVERY SINGLE ONE WAS CRACKED. He ordered one from me and hasn't looked back. I sell them rebuilt but they are not cheap, but it's done right. And every day it's harder to find them as supply decreases since they are NLA. Do it right the first time, it's cheaper in the long run. email me with questions or order them here 3FE Head, Completely rebuilt and Ready to Drop in
That said, 3_puppies is a good seller and I recommend him often, so if he says it's good, feel free to go that route.
A previous customer went through 5- repeat five- 3F heads he picked up from local SoCal junkyards before contacting me. EVERY SINGLE ONE WAS CRACKED. He ordered one from me and hasn't looked back. I sell them rebuilt but they are not cheap, but it's done right. And every day it's harder to find them as supply decreases since they are NLA. Do it right the first time, it's cheaper in the long run. email me with questions or order them here 3FE Head, Completely rebuilt and Ready to Drop in
That said, 3_puppies is a good seller and I recommend him often, so if he says it's good, feel free to go that route.
Tauro75, I've done business with Jason in the past; he is great to work with. I would recommend him.
I have one off a running 165,000 parts truck. i'l pm you with details. I'm in SoCal 91350.
pardion
SILVER Star
What is the casting number of this head?
I can check this evening.
arcteryx
Supporting Vendor
3FE heads should be 61080
Didn't get a chance to check this past evening. Still on my list.
I am in need of a head for my 89. I've already been through one that was found to have a hairline crack during resurfacing. This has become a nightmare!!!
I hope you got your money back.
You should start a new wanted thread versus tailing onto this older thread.
Thanks for the advice. It's in the works$$$$. In the meantime I'm on the hunt for another one.
