Wanted FJ60 Manual (42 Viewers)

[nuclearlemon]

check with treeroot...we've been tearing down a 60 in his backyard.

 

[Capt. Jim]

PS 80 series sun visor needed.

Still looking. Need tan in color. 1997 if that matters.

 

[Mike Goodknight]

What kind of Land Cruiser is it????? I probably have one. Call me 970 270 3332

Mike

 

[RIDDLER]

Aisin hubs

I need a set of Aisin hubs for a 79 FJ40. Mine has never had lockup hubs installed?

thanks

Aaron

 

[j-dub]

Wtb: Clinometer (tilt-o-meter) From 4runner

Looking For A Stock Clinometer/altimeter From An 80's 4runner

 

[Red Fox Ranch]

Rear Tail Lamp plugs for 7/'76 Fj40

What I am after is the plugs that someone may have clipped off a rear wiring harness that the rear tail lamps will plug into. I have a July of '76 Fj40, Any help?

 

[cruzerman350]

pop out window for hard top

i am looking for the passerger side pop out window off a 78 hard top. mine exploded.

 

[proffittscruisers]

1 877 Proffitt $15

 

[proffittscruisers]

1 877 Proffitt $25

 

[cruzerman350]

sweet thanks. how much for shipping to 93442? if you wouldnt mind

 

[3_puppies]

What kind of Land Cruiser is it?????

Mike

that's what I wanted to know

 

[Eric Winkworth]

Was wondering if anyone has...

I need two head rests for my back seat

I also need a crank knob for my driver seat

and finally I owuld like the gauge in the center of the dash in this picture, I know it isn't likly finding one as I have been told they didn't com on the old BJ's

 

[crushers]

i think a fellow in our club dought the setup from Toyota, a small fortune of course but looks real nice...
what colour is your truck?

 

[bigbrowndog]

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&category=10428&item=4555738122&rd=1

 

[mike]

I have a spare if you still need one?I'm located in Toronto,Canada. Thx

 

[FJ40Jim]

The later ones Mark is looking for have a much beefier cross section (almost a rectangular cross section) versus the oval cross section of the earlier arms.

Mark,
I only have the earlier ones loose. There is a 10/85 and 03/87 trucks in the shop, they both have the larger arms. My 1983 has the oval arms, just like you said. Dammit, now I have steering arm envy!

 

[BillWms01]

Ditto what Jukelemon said. I've just had my first experience with him, and he was a pleasure to deal with. On top of that, his price for my part was 25% less than my local dealer. He's a regular poster here, and American Toyota is an advertiser, too. His # is 800-432-6668.

 

[2badfjs]

i picked up

I want a really loud horn. What should I get?

the harbor frt FIAMM horns, twin air.
they are loud, but do not have deep sound/
they are kinda import carish.but loud

 

[Tonito]

Its original in the light duty 70s (Prado, Bundera, LandCruiserII ... wtf), but there are differences with the gauges.
The ld-originals come with lev-o-gauges etc. (like on the pic above) but you can order another version from toyota with a second tank-indicator and an outside-temperature-indicator or even a clock i think.

have a nice day

 

[Eric Winkworth]

That is pretty much exactly what I want, but the one in my picture looks a little more finished off, I was told from G&S that BJ70's like mine never came with them, but what would the picture be of a euro spec LJ7 or something?

my interior is pretty much exactly like that

I included a pic of my interior