Wanted FJ60 Manual (24 Viewers)
- Thread starter Webster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Any 3B's for sale?
I just bought a '79FJ40...it will probably get a new aluminum tub first, but I'd like to convert to a diesel at the same time while the body's off. Mechanically it's top-notch.
Anyone have a rusted out BJ for sale, or a source for a complete motor and associated components? I'm located in Washington, but would travel a ways for something decent.
I just bought a '79FJ40...it will probably get a new aluminum tub first, but I'd like to convert to a diesel at the same time while the body's off. Mechanically it's top-notch.
Anyone have a rusted out BJ for sale, or a source for a complete motor and associated components? I'm located in Washington, but would travel a ways for something decent.
Need mirror Arms for FJ40
Looking for a set of mirror arms that bolt to the doors condition not a big concern as long they are not bent or extremely rusted. Mirror heads not important, this is for a later model FJ40. I do not want to a dream price just a fair one. I have some arms for sale/trade that have been extended by the PO so could see arond a trailer. I also have a set of the CCOT windsheild mount ones that are new.
Thanks
MJM
Looking for a set of mirror arms that bolt to the doors condition not a big concern as long they are not bent or extremely rusted. Mirror heads not important, this is for a later model FJ40. I do not want to a dream price just a fair one. I have some arms for sale/trade that have been extended by the PO so could see arond a trailer. I also have a set of the CCOT windsheild mount ones that are new.
Thanks
MJM
gas pedal
sent ya a PM
sent ya a PM
ClemsonCruiser
Supporting Vendor
FJ40 parts
I need a the RH and LH bumper extensions off the front of a 40 frame. I also am looking for an oil filter bracket set up to run the oil cooler.
Any help is appreciated
JP
I need a the RH and LH bumper extensions off the front of a 40 frame. I also am looking for an oil filter bracket set up to run the oil cooler.
Any help is appreciated
JP
what bracket
the one that bolt to the manifold(old style)
i think i have one. i'll haqve to look.
if i have it,it's yours.
NO CHARGE! i dont need it....
i hope i have it
the one that bolt to the manifold(old style)
i think i have one. i'll haqve to look.
if i have it,it's yours.
NO CHARGE! i dont need it....
i hope i have it
If you are looking for the pieces that bolt to the side of the frame. I have a set in Colorado Springs. $15 plus shipping and they are yours. samsr@rocketmail.com I also have the plates that bolt to the top of the frame. same price
Last edited:
Emil,
https://forum.ih8mud.com/showthread.php?t=46109
Who's 79 did you buy? You can crash out here if you need to.
https://forum.ih8mud.com/showthread.php?t=46109
Who's 79 did you buy? You can crash out here if you need to.
Ihave a couple here in Colorado Springs. $50 and it is all yours. samsr@rocketmail.com
i'll let you know
thanx
thanx
ClemsonCruiser
Supporting Vendor
the bracket that mounts to the enigine block with the oil filter on top, I forgot to mention it is for a 2F 1/76 and up
Here is a link to SOR.com it is down the page a bit: http://www.sor.com/sor/cat026.tam?xax=14263&page.ctx=cat026.tam
so I don't think what you have is what I need, but let me know if it is I will def take it.
Here is a link to SOR.com it is down the page a bit: http://www.sor.com/sor/cat026.tam?xax=14263&page.ctx=cat026.tam
so I don't think what you have is what I need, but let me know if it is I will def take it.
Thats Clear Enough For Me
sorry cant help.
i've got the second style.
sorry cant help.
i've got the second style.
PM grease_cruiser on this board, he one if not two 3B's, one with a H55F, 12 volt, out of a BJ60 that he is thinking of selling. He is in Colorado but the engines might be at proffitt's cruisers, I dunno...
I Might Have A Pair
i'll look tonight
i'll look tonight
ClemsonCruiser
Supporting Vendor
no worries my fault for not being more specific.............
good stuff
a 13bt is a bit much, but i just sent a msg to greaser guy. that combo is more to my liking.
wes and andre, how i could get to colorado from dc i'm not sure. driving...yea, that's a little far. how difficult is a 2F to 3B conversion in a 40, and how long would it take? Maybe we could talk offline about doing the swap if I drove it out and spent a week, like a little vacation. perhaps you all kind find a buyer for the drivetrain currently in...just ticked over 100k last week.
it's one of stumbaugh's trucks. mechanically it's great, but there's a lot of rust in the rear quarters, floorboards etc. who makes aluminum tubs and is there any advantage of those over a fiberglass one?
a 13bt is a bit much, but i just sent a msg to greaser guy. that combo is more to my liking.
wes and andre, how i could get to colorado from dc i'm not sure. driving...yea, that's a little far. how difficult is a 2F to 3B conversion in a 40, and how long would it take? Maybe we could talk offline about doing the swap if I drove it out and spent a week, like a little vacation. perhaps you all kind find a buyer for the drivetrain currently in...just ticked over 100k last week.
it's one of stumbaugh's trucks. mechanically it's great, but there's a lot of rust in the rear quarters, floorboards etc. who makes aluminum tubs and is there any advantage of those over a fiberglass one?
I have all the brackets for the front bumper off of my 69 fj40, you can have the bumper too if you want, not straight tho. PM me if your interested, I can email you pics if you like.
