lookin for 1972 fj40 warn locking hubs
the title says it all.....
the title says it all.....
Wanted FJ60 Manual (3 Viewers)
- Thread starter Webster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Joined
- Jan 16, 2003
- Threads
- 345
- Messages
- 3,650
- Location
- Charleston
- Website
- www.oldenorthstatecruisers.com
Need harmonic balancer
Need a harmonic balancer for a 89 FJ62, any help would be great thanks
Need a harmonic balancer for a 89 FJ62, any help would be great thanks
i have one in washington state (98944)
Mud_Guppie
EBI Cruisers
- Joined
- Apr 29, 2002
- Threads
- 135
- Messages
- 1,293
- Location
- Port Coquitlam, BC
- Website
- www.extremebends.com
it ain't gonna work!
Diesel 3B will not mate to a F or 2F bellhousing
I don't think the shift points of a SM465 or even a SM420 would be very good with an underpowered diesel
if you have a 3B you need to go with a H41,H42,H55,LC auto
I have all the above parts in stock and can take pics of each one so you can see for yourself if you like.
Just let me know.
Diesel 3B will not mate to a F or 2F bellhousing
I don't think the shift points of a SM465 or even a SM420 would be very good with an underpowered diesel
if you have a 3B you need to go with a H41,H42,H55,LC auto
I have all the above parts in stock and can take pics of each one so you can see for yourself if you like.
Just let me know.
OME shocks
Doing an OME heavy lift, need 4 shocks, either new or used. thanks.
Doing an OME heavy lift, need 4 shocks, either new or used. thanks.
Josie'sLandCruiser
Stop calling it a "FJ."
Hi All:
Just use a generic auto trans cooler. Their small, and cost like $20 at Shucks/Checkers,/etc.
Regards,
Alan
Seattle
Just use a generic auto trans cooler. Their small, and cost like $20 at Shucks/Checkers,/etc.
Regards,
Alan
Seattle
If your still looking, I have one for sale in Virginia if its any closer to you.
Josh
Josh
Fj60 -62 wheel
Looking for a nice rust free stock chrome fj60-62 wheel. I have three clean and one rusty one, that I'd like to replace. Will pay reasonable price + shipping. Thank's
Looking for a nice rust free stock chrome fj60-62 wheel. I have three clean and one rusty one, that I'd like to replace. Will pay reasonable price + shipping. Thank's
Kurt:
I will not be there. What do you have? Is it the one you bought from Cinci?
Thanks
I will not be there. What do you have? Is it the one you bought from Cinci?
Thanks
San Jose
I have one in San Jose, plus I have the sheet metal inspection cover for the bottom.
I have one in San Jose, plus I have the sheet metal inspection cover for the bottom.
treerootCO
Where are my keys?!
Looking for wheel spacers 1 to 1.5 (FJ40)
Looking for a temporary fix for CMO5. I decided I won't be able to get the FJ60 axles under the truck and I need 1 to 1.5" wheel spacers to clearance the tires a little. Anyone have a used set laying around?
6 x5.5 bolt pattern both ways
I will probably trailer the 40 down there and back so I am not worried about losing a wheel on the highway.
Looking for a temporary fix for CMO5. I decided I won't be able to get the FJ60 axles under the truck and I need 1 to 1.5" wheel spacers to clearance the tires a little. Anyone have a used set laying around?
6 x5.5 bolt pattern both ways
I will probably trailer the 40 down there and back so I am not worried about losing a wheel on the highway.
Last edited:
treerootCO
Where are my keys?!
i just called a vendor
of mine and they dont carry them anymore, was checking price for ya to see if we could beat their price. not gonna happen. anyone got more than one set i could use some also. of course, after treeroot gets hooked up!
of mine and they dont carry them anymore, was checking price for ya to see if we could beat their price. not gonna happen. anyone got more than one set i could use some also. of course, after treeroot gets hooked up!
Working Cig lighter for a an FJ40.
Thanks
Thanks
check ebay 
