Wanted FJ60 Manual (17 Viewers)

[CruisinGA]

FJ60 window

Tried C-Dan yet? His smart shopper program might net you one for less than your local stealer can. Shoot him a PM and see what he says.

 

[CruisinGA]

2F air box

I think Cruiserhead05 has got one. Might want to PM him/check for sale section.

 

[informationjunky]

Re:2F air box

Hey Brad, as soon as I find my cable for my camera, I'll send ya pics of airbox.

 

[cruiser_guy]

Disc brake fj40/55 wheels in WA or ?

4 on E-Bay right now! I looked at them on the weekend (I was out there for something else).

 

[louaxtjr]

FJ62 Power Steering lines

Thanks for the suggestion. Found a parts store willing to make up some pressure hoses with compression fittings to mate up with the Toyota fittings (re-used the ends of the hard lines.) $60 and no more leaks. Thanks again.

 

[Jman]

FJ60 window

You need the "emergency entrance" window? The "dealer only" one?

Last year, my dealer (who has like a 20% markup for "old trucks" it seems) still charged me only $30 or so. Had it in two days. Ran around with some duct tape and an old shower curtain with fish on it as a window for a while--the kids loved it.

 

[rick_d]

Anybody have complete Ac kit for FJ40?

sourcing an OEM a/c is a nightmare. Many, many parts are very hard to find with #1 being the heater duct as it is different for a/c models. If you look at CCoT's set up, they use dryer hose for this! The vintage air works well but will not add much to resale value. CCoT's looks a lot like OEM in the cap and all the parts are new and should function for years- it's a toss up. OEM systems, well you have to find a truck to part out to get it.

 

[Cruiserhead05]

2F air box

Yes i do have an extremely nice air cleaner setup for sale on ebay. toook it all apart. sanded it, primed it, and painte with $$ engine block paint. starting bid 65 no reserve

 

[CruisinGA]

Anybody have complete Ac kit for FJ40?

Do the factory FJ40 A/C systems really put out that much cold air? As in could it keep a hard/soft topped 40 comfortable in 85-90 degree Atlanta weather? are the only vents those under the dash?

 

[Wadesters]

Crusier parts needed

I have a bunch of parts. Check the following site and let me know if you see anything:

http://www.fototime.com/inv/BB5A28DF1E1FF3C

 

[Wadesters]

4spd tranny

I have one in Ga, check the following:

http://www.fototime.com/inv/BB5A28DF1E1FF3C

 

[Wadesters]

Wanted: wiring harness

I have one from a 79, check the following:

http://www.fototime.com/inv/BB5A28DF1E1FF3C

 

[godzilla]

Wanted-Hardtop Raingutter-Pa

Anybody have a raingutter, or raingutter and fiberglass cap in pa, they'd be willing to part with? I have lost the battle to rust with the one I have. Thanks

 

[Mr.Bryan]

Wanted - LX450 Stock Springs

If anyone is looking to get rid of a pair of stock 450 springs sitting around their place, email me at Bryank321@hotmail.com

-Bryan

 

[RJHR]

Re:Wanted - LX450 Stock Springs

I have some I would trade for OME's

 

[Junk]

Soft Top & Doors or just any doors

I have a Pakistan soft top I bought from Ehsan, during the early first group purchase (read cheap ). It should be here next week. Sold my 40 so don't need the top. PM me if you're interested. It's Tan2.

 

[73cruiser]

Crusier parts needed

I have the parts you need to go back to stock or an aftermarket rear bumper with lights.Let me know if you are interested in either.

 

[Sodder]

Crusier parts needed

Whats the price on the aftermarket bumper. And can I get some pics at jlangfo1@utk.edu

 

[hendo]

Re:steering arms

i have the whole lot arms drag link etc even new tie rods $150 you pay ship

 

[Outback]

Need an EZ-Locker...

I'm looking for an EZ-Locker for the front axle on Buddy, my '72 FJ40.

I have one in the rear axle and love it.

I got the rear one used so I'm looking for a used one for the front.

Let me know if you got one...

Jody.