Wanted FJ60 Manual (5 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Guy said he was in no hurry to sell it " P have had it for ten years....it not going anywhere" and since I was sooooooooooo interested he would hold it till the next day for me to come out and check it out. Well, that was about three weeks ago.....I have tried his number at lease 14 times.......Well...Another poor guy fell off the planet.
.
.
. .
.
:confused:
 
75-84 wiper motor

I had to replace my windshield frame and wound up with the newer style. I'd love to trade for the orig out of my '69 if someone needs it. I bench tested it and it does work.

Thanks
 
Cruiserman:

I need the hood to be restorable. I would prefer the hood to have the metal pedastal with small rubber rests for the windshield than the big chunks of rubber.
 
Knighthawk:

Thanks thats a great hood. But I need one with the metal pedastal
windshield rests. I believe they are welded on the hood.
 
I need the pieces that blow the air onto the windshield glass. In the above pic you can see the two pieces, the vent within the frame, and the top piece that directs it to the glass. I would need it for both sides. My question is, did windshields not come with them if there was not a factory heater installed.
 
Ive got a clutch pedel setup from a 68 Im not using after auto conversion.
 
that sucks, do you know where it is?

I can track the guy with just a bit of info ;)

John

In2cruisers said:
Guy said he was in no hurry to sell it " P have had it for ten years....it not going anywhere" and since I was sooooooooooo interested he would hold it till the next day for me to come out and check it out. Well, that was about three weeks ago.....I have tried his number at lease 14 times.......Well...Another poor guy fell off the planet.
.
.
. .
.
:confused:
 
after Bull I am looking for one also, real or repo.
 
I'm in the Vancouver area of BC Canada
I have a stack of disk front diffs
 
TOY350 said:
Still tracking it down for the pic guys, hang in there.


Does'nt John have one hanging on the wall above his welder?
 
76FJ55 said:
As the title would suggest, I need an oil fill cap. I'm looking for the press in style for an early 2F, so if anyone has a spare laying around I could use it. If you have one let me know what you want for it.
Simon

I have one. Fifty cents plus shipping and packaging. Shoot, I would check your local dealer. Shipping might cost more than the cap.
 
Just so you know those are still available from Toyota. I don't recall them that expensive either.
 

Users who are viewing this thread

Back
Top Bottom