send you a PM
Wanted FJ60 Manual
- Thread starter Webster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Texican
s-Moderator
I need them to fit an FJ60 axle also,........
still looking, i would love to see what stuper has, since hes close and i wouldnt have to worry about shipping, thanks
also, treeroot, how bad of shape is the passenger side rear quarteron that 60?,i need from about that ridge above the emblem down mines kinda thrashed and im trying to see if it would be better to get a new one and weld it in rather then try to do a ton of body work on it
also, treeroot, how bad of shape is the passenger side rear quarteron that 60?,i need from about that ridge above the emblem down mines kinda thrashed and im trying to see if it would be better to get a new one and weld it in rather then try to do a ton of body work on it
treerootCO
Where are my keys?!
https://forum.ih8mud.com/showthread.php?t=36474
I'll get a better shot in the morning. Shipping will add to the cost some but maybe 100?
I'll get a better shot in the morning. Shipping will add to the cost some but maybe 100?
Got your PM. Working on getting you the info...sorry for the delay.
Nick
Nick
'94 80-series front passenger side running light(amber corner light) and fender
Anybody got anything for me? I know about cruiserparts.net In fact I have a fender that I ordered from them. Unfortunately the one they sent me is for a '96 and doesn't work with my '94
Thanks
Ary
Anybody got anything for me? I know about cruiserparts.net In fact I have a fender that I ordered from them. Unfortunately the one they sent me is for a '96 and doesn't work with my '94
ThanksAry
WTB Rear door hinges FJ40
Looking for 2 rear half door hinges , Fj40. Pm or email Phansm72@sc.rr.com
Thanks
Looking for 2 rear half door hinges , Fj40. Pm or email Phansm72@sc.rr.com
Thanks
phishtaco
Cincinnati
go look in your garages
Cool no problem 
Looking for FJ 80 "fender flare boots"
Does anyone have a set of the black rubber "boots" for sale? These are the splash guards that go on the bottom of the rear fender flares on my 95'. ( you know the boot or splash guard that rests on the factory running boards? I was hoping someone had some taken thiers off for a slider install.
airlaird
Does anyone have a set of the black rubber "boots" for sale? These are the splash guards that go on the bottom of the rear fender flares on my 95'. ( you know the boot or splash guard that rests on the factory running boards? I was hoping someone had some taken thiers off for a slider install.
airlaird
what the heck is that? sounds interesting if nothing else, got any pics?
John
John
Goebeler said:
Will the threads in the drag/relay rods accept 1 ton? Would you/could you ream them out? I would be interested in the setup.
Thanks,
Mark
Thanks,
Mark
orangefj45
Supporting Vendor
the 1 ton TREs have a bigger thread so you'd have to make new tie rods. the one ton ends and threaded inserts (weld on type) can be bought from luke at 4x4labs.com pretty sweet setup.
96-97LX Running boards WTB
Got a friend (non member) that needs a set of Running Boards for his '97LX. The LCs may or may not be interchangeble w/ the LXs. He is in Chesapeake, VA.
Thanks,
Mark
Got a friend (non member) that needs a set of Running Boards for his '97LX. The LCs may or may not be interchangeble w/ the LXs. He is in Chesapeake, VA.
Thanks,
Mark
NorCalDoug
problems solved daily...
LOL! Somehow when I first read that I read Chesapeake as Cheapskate.
The LC running boards from a 95-97 should fit, but will not match color-wise. LX 450s running boards are color matched to the body panels.
I'll have a set from a 450 to let go, but not until mid-May.
I think Romer (on this board) might have a set. He recently picked up sliders from Slee Offroad.
The LC running boards from a 95-97 should fit, but will not match color-wise. LX 450s running boards are color matched to the body panels.
I'll have a set from a 450 to let go, but not until mid-May.
I think Romer (on this board) might have a set. He recently picked up sliders from Slee Offroad.
May have a set from black/grey off 97 lx....still waiting on insurace to deside what to do with mine.
80 series factory diff lock 3rd member parts
Does anyone have an extra 3rd member I can buy to suit 93-97 80 series w/ factory locker. It does not have to function, and I dont need the actuator. I mainly need the carrier case (houses the spider gears, and that the ring gear bolts to). I will be using it to regear my 100.
Thanks,
Carl
montocr@yahoo.com
Does anyone have an extra 3rd member I can buy to suit 93-97 80 series w/ factory locker. It does not have to function, and I dont need the actuator. I mainly need the carrier case (houses the spider gears, and that the ring gear bolts to). I will be using it to regear my 100.
Thanks,
Carl
montocr@yahoo.com
please keep teh wanted ads out of tech as requested previously
lx450landcruiser
Moderator
front lx corner light
i smashed my driver side corner turn signol. i dunno how since i have an arb but oh well. n need just that side or i guess amber landcruiser ones both left and right if they fit? i think they do and if there cheap.
thanks
mike
i smashed my driver side corner turn signol. i dunno how since i have an arb but oh well. n need just that side or i guess amber landcruiser ones both left and right if they fit? i think they do and if there cheap.
thanks
mike
