Wanted FJ60 Manual (29 Viewers)

[DomSmith]

Where are you located?

 

[Motar]

I'm located on Shaw Island Washington

 

[DomSmith]

I have a booster I removed from my March '73 FJ40 for a disc brake conversion. Worked great before removal and has been boxed in the garage since (approx. 1 year). Master is still attached (although a bit leaked on with brake fluid while in the box). I can send you a pic if you want. $40 plus shipping. Let me know if you're interested.
Dom

 

[DomSmith]

DAMN!! Was that "Shaw Is. Wash" there the whole time? My eyes must be bad!!

 

[Trail Cruiser]

LIFT KIT 4"

looking for 4" lift spring for 72 fj40

 

[Poser]

DAMN!! Was that "Shaw Is. Wash" there the whole time? My eyes must be bad!!

No it was not, your eyes are fine...

 

[Cruise1977]

Alcan springs

I have a set of 4-6" Alcan springs for sale. They are new, I fitted them up to my FJ40 once to determine shock length then swaped them out until shocks arived. I never got around to installing the brand 4 new Warn Black Diamond XT's. When tested on a RTI ramp they stuffed a 35" Baja Terrain up in the front fender without touching the inner lip of the fender. The backs are a little stiff for the spares I carried, but if you don't lug around that many tools and spares, you could remove a leaf. I would like $800 for the package. I'm in VA. cruise1977@aol.com

Josh

 

[Cruise1977]

I have a set of hub caps for sale. $10 ea. rear view mirror $10 I think I have a choke cable $5 and which glass do you need? The big side window, corner or push out vent?

cruise1977@aol.com

Josh

 

[e rock]

Like I said, I haven't taken it off to get a good look. The plastic around one of the spokes is cracked (and has been for many many years) near the hub. I finally broke the whole spoke free from the hub.

I was thinking about trimming the plastic back a bit so it wouldn't melt much. If it doesn't work... well, that's why I'm asking around for a replacement. And if it's ugly, maybe the PS conversion will move up on the list.

 

[Motar]

sorry didn't mean to play triks on your eyes. Hay that sounds like a good price to me. would you like a money order. Let me me know what you'd like. A pic would be good thanks. Brad

 

[DomSmith]

emailed you.

 

[MSGGrunt]

Need 97 FZJ80 Valve Cover

I'm in need of a valve cover that will fit my 1997 FZJ80.

 

[Bull22]

emailed you

 

[bjowett]

I'll have an extra from my 94 engine, don't know if it will fit... what happened to your's??

 

[RredFJ40]

T/C Vacuum Switch Valve Needed

I need a transfercase vacuum switching valve for an FJ62. These are located on the firewall to the left of the engine (looking from the front). There are a pair of them, I need the bottom one that pulls the TC out of 4WD. Either might work but I'm not sure.

TIA

 

[jkravito]

Sorry for the delay in getting back to you all. I picked these up locally and quick shipped them to a friend. Thanks for all the feedback.

 

[Trail Cruiser]

How much steering modifications have to be made to install those springs and shocks

 

[Cruise1977]

My guess is that you will need to do similar mods as needed for spring over. some kind of z link or high steer. I knoticed some bump steer driving it to the rti ramp. You will also need to do some rear drive shaft mods. Rotate pumpkin up or cv joint shaft.

Josh

 

[erics]

did you get this? if not I have a whole set of grey armrests from an 85 fj60 I parted

 

[Animal]

850J springs

Looking for a set of used or new 850J springs. Anyone have some for sale?

e-mail me @ acbarta@yahoo.com

Thanks