Wanted FJ60 Manual (77 Viewers)

[Biff]

How much for a used unit?

 

[theo]

I have one. It's with the core I took to the machinist. I can get it easily if you want it. Not sure what to ask. Shipping would be maybe $10.

 

[3_puppies]

I think so, but using old rubber when you have them out, personally I'd go new. then you wouldn't have to do it again.

 

[blackandbluefj]

1987 fj60 doors

help me all you cruiserheads i atleast need a passenger front door without all the rot that mine has, some surface rust would be ok but no holes. I hate to sound cheap but I need a door badly as cheap as i can get mine will probably be in two pieces by the end of the year due to rust. So if anyone has a door around help a brother out. And any other doors too I might neeed another too. Just email me or I check the board nightly.


Thanks all
Bryon

 

[RJHR]

Michelin LTX 275/70/16

Looking for stock 80 series tires in great condition. I am at zip 28306.

Thanks.

 

[Bull22]

I have a 4 speed tranny and transfer case from a 78 FJ40 if you are interested. Email me if you are interested at icculus@ptd.net

 

[66fj40x2]

Spaceghost SM420 / 3 Spd Adapter

Looking for a spaceghost built sm420 / 3 speed adapter. Anyone willing to part with one?

 

[macgyverFJ62]

or some extended shackles

 

[cruiseroutfit]

What are you specs? FJ62 I presume, but how much lift? I have some "New-Old Stock" OME shocks here on the shelf... Lemme know.

 

[macgyverFJ62]

FJ62 3 inch lift

 

[Home Built]

I got sides and the top. needs some work but it's in pretty good shape.
Asking 150 for it.

 

[devo]

Kurt,
I bought my FF from you. Do I dare send you more $$$
How old and how much?
give me a price on the harness if that's not included.
devo

 

[Isotel]

just an FYI Woody, The admin of this board recently came out with a sm465 to 3 speed

http://www.ih8mud.com/products/sm465.php

 

[cruiseroutfit]

Kurt,
I bought my FF from you. Do I dare send you more $$$
How old and how much?
give me a price on the harness if that's not included.
devo

Acutally you bought your full-float from my customer Oliver, I just shipped it. Was there a problem with it? Everyone else has had good luck with theirs?

 

[Isotel]

ive got a spare warn hub for a 76

 

[Bruno AZ]

Looking for stock 80 series tires in great condition. I am at zip 28306.

Thanks.

I have a set of 4 brand new with stickers still on them Michelin LTX 275/70/16 M/S. I am in AZ 85224. I bought them 7 months ago to put on my 1980 FJ40. I was going to buy a set of 16" Weld Wheels and then a buddy of mine rolled his Chevy and I bought his Weld wheels with New Bridgestones. I've got $588.00 into them and would like to get $375.00 out. Shipping could be too much to make this offer of any value to you. Let me know I could run them over to greyhound as I think that would be the cheapest shipping. I can send pics just need your email.

Thanks
Bruno AZ

 

[landcruiserdude]

I PM'd you. I've got everything except the right base gasket.

 

[johnnyb_s]

Heater valve and fittings

I'm in need of a heater valve and copper hose fittings (T's) for a '78 heater system. Thanks

 

[FJ55]

FJ40 Front Doors

Looking for some front doors, '75 and newer. Must fit my '82 and be in great shape.

Thanks,

FJ55

 

[dgangle]

WTB fine-spine birfs and locking hubs

I want to buy two good used fine-spine birfs and locking hubs. I know acceptable donors are 76-78 FJ40's and 79-85 Mini trucks, maybe others.