Wanted FJ60 Manual (4 Viewers)

[brock1980fj40]

Re: Holley Adapter Plate - Cheap

check out your local parts store, I saw a mount that adapted 2barrel to 4 barrel there pretty cheap, I think I was at checker.

 

[Guest]

Re: LC Spit Tcase [IN]

Hey i have one for sale its located in seattle , give me a e -mail and lets talk , it's hooked to a 4 speed , with all the linkage and stuff

tmbrtmr@aol.com

 

[Guest]

Re: 1979-1983 seat or seat back

I have a set of late model bucket seats I'll sell. Email me directly if you still need some.

robahjunior@hotmail.com

 

[SpaceGhost]

Re: LC Spit Tcase [IN]

Sent an e-mail. Anybody got one closer?

 

[72cruiser]

Re: fj-40 oem original soft top parts wanted

hey brian,

i was lookin around this site, and remembered that you wanted some bows.

http://www.cruiserco.com/Classifieds.htm

they're down at the bottom of the page.

jonathan

 

[kstatecruiser]

three speed floor conversion

Just as the topic said, I need a three speed floor conversion for a '67 40.

 

[woody]

Re: three speed floor conversion

For those reading, the top plate and shift tower from the 73-earlier floor shift models is a bolt in...considering the trannies themselves are usually only useful for paperweights.

I sold my last plate/tower/shifter and sent the rest to the recycle heap...

 

[3_puppies]

Re: three speed floor conversion

I've got 2 of them. I'm in Helena, Montana.

 

[rick_d]

Re: 1979-1983 seat or seat back

thanks all-

found a pass seat for a good deal and 90% shape. The drivers I will use the old pass seat and a new bottom and pad from mother Toyota and Specter.

 

[FJ_MONSTER]

Re: three speed floor conversion

ive got one too,in colorado.
whats it worth to ya???
i dont have a clue.
shoot me an offer and its yours.

 

[FJ_MONSTER]

Re: FJ40 F Exhaust Manifold/heatriser

ive got the exhaust mani,but whats a heatriser,my setup came off of a 73 still complete with carb and intake mani.

 

[Guest]

FJ-60 Front axle in/or close to WI

Don't care on the year, just needs to have the inners and the 3rd member, I really don't care about the rest, since a mini ends will go on it. email me at

jacobw_25@yahoo.com

Thanks

Lee

 

[IDave]

Re: FJ40 F Exhaust Manifold/heatriser

The heatriser is a valve that lives in the bottom of the manifold. There should be a case with a spring in it connecting the valve, which goes across the outlet. There is a counterweight that looks like a knob on the side opposite the spring case. When the engine is cold, the heatriser directs hot exhaust toward the underside of the intake manifold until everything warms up. Then, the spring opens the valve and directs the heat out the exhaust pipe. The bits and pieces corrode away on some rigs, but if yours is working (the valve should turn easily and the spring should not be broken) I'd sure be interested.

Dave

 

[peterbiere]

Re: FJ40 Rear Heater Motor needed

Thanks, Dave!

 

[kstatecruiser]

Re: three speed floor conversion

FJ Monster, I sent you an email

 

[coachconverter]

Cowl Panel Dr. Side

Recieved my tub from out west today!!!

Bad news is the shipper smashed in the front left corner, where the kick vent is. I need to find that whole panel if possible. I have one on a cowl at home, but would rather find a new one then use it.

Does anybody either know who sells this panel, or have one they can sell?

Thanks
Todd

 

[rocrawler]

Re: three speed floor conversion

I've got 2 or 3 of them out in the garage. Will include the 3 sp tranny at no charge. Located in NV.

 

[helocat]

One piece OEM tail gate

Factory rear one piece tail gate for a FJ-40 PM me or e-mail mark@metal-tec.com

Thanks!
Mark

 

[helocat]

Re: 79 or later ebrake handle and bracket

Same here I have a whole set up out of a 80' FJ-40. e-mail me an offer. mark@metal-tec.com

Mark

 

[helocat]

Re: Don't Laugh - FJ25 Parts Wanted

Sorry Jim,

I have a guy I have been working for years to let me have the 62' FJ-25 rotting in his front yard. It will become mostly a parts rig for who ever ends up with it. The guy claims to have the original door frames in his barn, but yet to be seen. I just need him to let me haul the thing off!

Good luck!

Mark