Wanted FJ60 Manual (3 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Re: Holley Adapter Plate - Cheap

check out your local parts store, I saw a mount that adapted 2barrel to 4 barrel there pretty cheap, I think I was at checker.
 
Re: LC Spit Tcase [IN]

Hey i have one for sale its located in seattle , give me a e -mail and lets talk , it's hooked to a 4 speed , with all the linkage and stuff

tmbrtmr@aol.com
 
Re: LC Spit Tcase [IN]

Sent an e-mail. Anybody got one closer?
 
Re: three speed floor conversion

For those reading, the top plate and shift tower from the 73-earlier floor shift models is a bolt in...considering the trannies themselves are usually only useful for paperweights.

I sold my last plate/tower/shifter and sent the rest to the recycle heap...
 
Re: three speed floor conversion

I've got 2 of them. I'm in Helena, Montana.
 
Re: 1979-1983 seat or seat back

thanks all-

found a pass seat for a good deal and 90% shape. The drivers I will use the old pass seat and a new bottom and pad from mother Toyota and Specter.
 
Re: three speed floor conversion

ive got one too,in colorado.
whats it worth to ya???
i dont have a clue.
shoot me an offer and its yours.
 
Re: FJ40 F Exhaust Manifold/heatriser

ive got the exhaust mani,but whats a heatriser,my setup came off of a 73 still complete with carb and intake mani.
 
FJ-60 Front axle in/or close to WI

Don't care on the year, just needs to have the inners and the 3rd member, I really don't care about the rest, since a mini ends will go on it. email me at

jacobw_25@yahoo.com

Thanks

Lee
 
Re: FJ40 F Exhaust Manifold/heatriser

The heatriser is a valve that lives in the bottom of the manifold. There should be a case with a spring in it connecting the valve, which goes across the outlet. There is a counterweight that looks like a knob on the side opposite the spring case. When the engine is cold, the heatriser directs hot exhaust toward the underside of the intake manifold until everything warms up. Then, the spring opens the valve and directs the heat out the exhaust pipe. The bits and pieces corrode away on some rigs, but if yours is working (the valve should turn easily and the spring should not be broken) I'd sure be interested.

Dave
 
Cowl Panel Dr. Side

Recieved my tub from out west today!!!

Bad news is the shipper smashed in the front left corner, where the kick vent is. I need to find that whole panel if possible. I have one on a cowl at home, but would rather find a new one then use it.

Does anybody either know who sells this panel, or have one they can sell?

Thanks
Todd
 
Re: three speed floor conversion

I've got 2 or 3 of them out in the garage. Will include the 3 sp tranny at no charge. Located in NV.
 
Re: 79 or later ebrake handle and bracket

Same here I have a whole set up out of a 80' FJ-40. e-mail me an offer. mark@metal-tec.com

Mark
 
Re: Don't Laugh - FJ25 Parts Wanted

Sorry Jim,

I have a guy I have been working for years to let me have the 62' FJ-25 rotting in his front yard. It will become mostly a parts rig for who ever ends up with it. The guy claims to have the original door frames in his barn, but yet to be seen. I just need him to let me haul the thing off!

Good luck!

Mark
 
You must log in or register to reply here.

Similar threads

flem0061
For Sale Haynes Manual 1980-1996
Replies
2
Views
408
cts
C
N
Wanted Manual front seat 80 series
Replies
0
Views
252
NeedNCtoy
N
65swb45
SOLD SoCal: 1988 Factory Repair Manual
Replies
5
Views
579
Yotajeff
Yotajeff
dr_dobro
For Sale FJ60 FJ62 Manual Chrome Door mirrors
Replies
0
Views
431
dr_dobro
dr_dobro

Users who are viewing this thread

Total: 4 (members: 0, guests: 4)

Share this page

Back
Top Bottom