any one ...
Wanted FJ60 Manual (66 Viewers)
- Thread starter Webster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
FJ60/62 rear bumper with hitch
Looking for a custom rear bumper with 2inch reciever hitch for a FJ60 or 62. Thanks
Looking for a custom rear bumper with 2inch reciever hitch for a FJ60 or 62. Thanks
theferg
SILVER Star
Dude, you should check out www.ironpigoffroad.com. Lance Williams is the owner. He's been involved with Cruisers for a long time. Anyway, they make a pretty stout, nice lookin' bumper for the rear of a 60. Scroll down on the first page there. Intro price for 60 series rear bumper says $325. Doesn't show a receiver tube, but I'm sure they could integrate one right on in there.
Plenty of other places that you could find one, but that's a sweet deal they got, plus they're right down the road from ya in Fredericksburg, VA.
Anyway, HTH. Good luck.
-Ferg-
Plenty of other places that you could find one, but that's a sweet deal they got, plus they're right down the road from ya in Fredericksburg, VA.
Anyway, HTH. Good luck.
-Ferg-
Me too! if anyone in the colorado area has one let me know. I'll take two!
CHEAP 2F long block rebuilder wanted in Denver, CO
I know many of you out there have a 2F engine just sitting in the corner of your garage because you just got done with a V8 swap. It's heavy, leaking oil, you stub your knee on it and the wife wants it out of the garage. Well act now and for the LOW, LOW price of free I will remove that piece of pig iron and give it a new loving home were it will be nurtured, petted and slowly rebuilt into a happy well adjusted land cruiser power plant.
Thx,
Kerry
I know many of you out there have a 2F engine just sitting in the corner of your garage because you just got done with a V8 swap. It's heavy, leaking oil, you stub your knee on it and the wife wants it out of the garage. Well act now and for the LOW, LOW price of free I will remove that piece of pig iron and give it a new loving home were it will be nurtured, petted and slowly rebuilt into a happy well adjusted land cruiser power plant.
Thx,
Kerry
Soft top wanted, may do partial trade for my hard top
I'm looking for a soft top for an FJ40. I will do a partial trade if you'd rather have a hard top. I will either keep the hard doors and put just a soft top on it, or will go for soft top and doors.
Would like to buy locally so I can see the top and/or doors, and I don't have to get it shipped. I'm in Lodi, an hour south of Sacramento. Anywhere within a couple hours of me is fine.
I'm looking for a soft top for an FJ40. I will do a partial trade if you'd rather have a hard top. I will either keep the hard doors and put just a soft top on it, or will go for soft top and doors.
Would like to buy locally so I can see the top and/or doors, and I don't have to get it shipped. I'm in Lodi, an hour south of Sacramento. Anywhere within a couple hours of me is fine.
71' fj40 windshield frame
just rolled it on the con if you have the glass i'll take that as well
just rolled it on the con if you have the glass i'll take that as well
orangefj45
Supporting Vendor
What is the condition of the hard top? I have a new (put on once) Kayline soft top and doors with ALL the hardware for installation. I live in Suisun, about 45 minutes west on Hyw 12 from you. PM me with a phone# and we can talk. Dan
I have a Yakima Loadwarrior. Give it to you cheap for $180 you pick it up or I'll bring it to Surf and Turff if you are going.
pics are here
http://yakima.com/home.html
pics are here
http://yakima.com/home.html
Last edited:
Seats for 80
Anybody have a set of 3rd row seats for an 80 that are just laying around or in your way? The PO of my 80 sold mine and I am about to have another kid, causing my cruizer to be one seat short. I don't want to get rid of the cruizer but I need the extra seating.
If you have them and don't want them, I'll buy them and pay for shipping. Thanks and Happy wheelin!
Dan
klierdj@earthlink.net
Anybody have a set of 3rd row seats for an 80 that are just laying around or in your way? The PO of my 80 sold mine and I am about to have another kid, causing my cruizer to be one seat short. I don't want to get rid of the cruizer but I need the extra seating.
If you have them and don't want them, I'll buy them and pay for shipping. Thanks and Happy wheelin!
Dan
klierdj@earthlink.net
Thanks
The warrior looks pretty cool, my 40 is white and black so may look sweet. I dont have the tools (or more importantly the skills) to cut the steel doors down but thanks for the heads up.
The warrior looks pretty cool, my 40 is white and black so may look sweet. I dont have the tools (or more importantly the skills) to cut the steel doors down but thanks for the heads up.
try cruise1977@aol.com He has one that I sold him a few years ago, red with good glass
- Joined
- Sep 28, 2002
- Threads
- 558
- Messages
- 8,122
- Location
- Kamloops, BC Canada
- Website
- www.shopraddcruisers.ca
I think there is a guy in your area with 5 FJ55s in various conditions for sale, he wants to get rid of the lot.
It just seems pointless for me once you add in the shipping, I am better off to keep looking in Western Canada or Washington Oregon area.
If you want his email address hit me off line at rclassman@shaw.ca.
Rob
It just seems pointless for me once you add in the shipping, I am better off to keep looking in Western Canada or Washington Oregon area.
If you want his email address hit me off line at rclassman@shaw.ca.
Rob
Spindles off Disc Brake axle
I need a set of spindles off a disc brake front axle. Doesn't matter the year, they should all be the same.
All I need are the spindles, not the birfields or anything else. I think pretty much the only things I didn't break or bend in my front axle are the birfields and axle shafts :whoops:
Also, I'm a broke college student, so the cheaper, the better
I need a set of spindles off a disc brake front axle. Doesn't matter the year, they should all be the same.
All I need are the spindles, not the birfields or anything else. I think pretty much the only things I didn't break or bend in my front axle are the birfields and axle shafts :whoops:
Also, I'm a broke college student, so the cheaper, the better
WTB: Aisin hubs
I'm looking for a set of Aisin hubs to be shipped to 22602
Thanks
Burl
I'm looking for a set of Aisin hubs to be shipped to 22602
Thanks
Burl
