Fender engine splash cover thingamajig.

[Highway Romping]

Does anyone know where I can find a replacement engine splash guard for a reasonable price? It's the rubber cover that's attaches to the fender with plastic clips? I need the front driver side for a 2017 Tacoma. My dumb self forgot to reattach all of the clips and it went flying into highway land.

 

[Pitch]

You can make your own on the cheap with shower pan liner from a local home improvement store. Cut to fit, works great, and won't break the bank.

 

[Highway Romping]

You can make your own on the cheap with shower pan liner from a local home improvement store. Cut to fit, works great, and won't break the bank.

What section of Home Depot would I be able to find this? I also need the clips since I lost those to the highway.

 

[Rudster]

Try Space age auto paint in Mesa for the clips. They have a big selection of that type of stuff.

Mesa Automotive Paint Refinishing & Coating Products - Space Age Auto Paint Store

Space Age Auto Paint Supply Store offers refinishing & coating products in Mesa, Arizona for the entire Phoenix area. Call 480-835-0971 for how-to tips!

www.spaceagepaint.com

 

[Highway Romping]

Try Space age auto paint in Mesa for the clips. They have a big selection of that type of stuff.

Mesa Automotive Paint Refinishing & Coating Products - Space Age Auto Paint Store

Space Age Auto Paint Supply Store offers refinishing & coating products in Mesa, Arizona for the entire Phoenix area. Call 480-835-0971 for how-to tips!

www.spaceagepaint.com

Oh nice!! I did not expect them to sell the clips. I will have to drop by to check them out.

 

[Pitch]

What section of Home Depot would I be able to find this? I also need the clips since I lost those to the highway.

In my local Home Depot it is near the shower doors, inserts, etc... Back of the store. It is usually on a big roll... Cut and buy what you need. I have a medium gray color.

 

[isthatalexus]

Please holler when you have this installed...or let me know if you want to meet up for two-brains-is-better-than-one time at Depot. I'm more towards central PHX, but have several instances of wheel well fixing needs.

 

[Highway Romping]

Please holler when you have this installed...or let me know if you want to meet up for two-brains-is-better-than-one time at Depot. I'm more towards central PHX, but have several instances of wheel well fixing needs.

I'm all the way in Gilbert so I will probably go to the Home Depot just down the road from me. I'll make sure to document the process and post it up when I get it done.

 

[LandCruiserPhil]

I have heavy duty rubber you are welcome to very close to the same factory material.

 

[Highway Romping]

I have heavy duty rubber you are welcome to very close to the same factory material.

Hey Phil, I'm more than happy to use your rubber, when are you available? I won't be able to make this month meeting since I will be out of town.

 

[LandCruiserPhil]

Hey Phil, I'm more than happy to use your rubber, when are you available? I won't be able to make this month meeting since I will be out of town.

I can just leave it out for you to pick up at your convenience. Let me know how large of a piece you need.

 

[LongDuck]

Pro-Tip: insert a bolt into each of your mounting holes and when you hold the rubber piece in place, whack the rubber with a hammer on each of the bolt heads without moving the rubber. This will imprint the locations of the holes on the backside where you can now drill holes for your mounting plugs to go.

 

[Lc80series]

You can’t go wrong with radrubber.com for these.

 

[Highway Romping]

Hi Phil, the size that I need is 11" x 15".

I was thinking of removing the passenger side and use it to trace it over the new piece and then cut it.

 

[cooziecup]

You can’t go wrong with radrubber.com for these.

Rad Rubber Design – FJ Fender Flaps, Toyota Engine Splash Guards – Rad Rubber Design – FJ Fender Flaps, Toyota Engine Splash Guards