So my 97 lx450 stated to have an issue with starting they ignition will not fire the starter off so I had to put in a push button for the starter so with the key in the run position I can push the stater and the truck fires right up I did replace the starter it didn’t change anything.
Second issue is it’s surging with the A/C on and almost dying.
Third issue is it will randomly stall and then it takes a good 45 sec or so cranking the starter for it to fire back up then it will idle up to 1900 rpm I have to put it in gear for it to drop down.
Any thoughts or input would be appreciated and yes I’ve tried searching.
Second issue is it’s surging with the A/C on and almost dying.
Third issue is it will randomly stall and then it takes a good 45 sec or so cranking the starter for it to fire back up then it will idle up to 1900 rpm I have to put it in gear for it to drop down.
Any thoughts or input would be appreciated and yes I’ve tried searching.