EGR cap for 75 carb

[cims1970fj40]

I was curious on what others are using to cap their EGR on a carb. My carb is a 75 and would like to know what size of a cap I would need. Thanks

 

[Grayscale]

I used a section of hose 17mm (?), a couple of hose clamps, and 10mm (?) socket head cap screw. The cap screw is the same outer diameter as the EGR tube, so it fits in front of the tube inlet.

 

[bhsdriller]

Section of hose similar to above but in the end I just filled it with RTV and made a plug

 

[Pighead]

I just cut that tube off flush and filled it with JB weld...