- Thread starter
- #21
Had another thought. Rather than running steel cable across the area between the two verticals, (in both directions) what if I run it from the very outer, bottom edge of the FR track, to the bottom of the closest bracket, and then do the same thing on the other side? If I'm picturing this correctly, lateral forces from one side should be limited/stopped by the cable on the other side of the trailer. Is that correct?
This would essentially be the combination of both approaches suggested above. The upside being that it would leave the room between the tent and the trailer empty.
This would essentially be the combination of both approaches suggested above. The upside being that it would leave the room between the tent and the trailer empty.