Disabling the AHC and AVS systems, no warning lights. (2 Viewers)

[tbisaacs]

So, installing the shocks and springs is the easy part…

I’m down to the passenger rear valve block and then will pull my dissent bumper and slip the pump out.

There are two really long lines that are above the gas tank / exhaust that I’m not mad enough about to extract.

This stuff is seriously heavy (in a robust way). Factoring in the hardware and guards For the accumulators, I suspect it’s 150+ pounds. Will throw it all in a bucket and weigh it once I’m done.

 

[turbo8]

So, installing the shocks and springs is the easy part…

View attachment 3877232

I’m down to the passenger rear valve block and then will pull my dissent bumper and slip the pump out.

There are two really long lines that are above the gas tank / exhaust that I’m not mad enough about to extract.

This stuff is seriously heavy (in a robust way). Factoring in the hardware and guards For the accumulators, I suspect it’s 150+ pounds. Will throw it all in a bucket and weigh it once I’m done.

It is so nice having all that free space and not worrying about it getting damaged.

 

[steezy]

It’s okay to change your mind

After seeing how crusty all of the lines and components are as in removing them, I feel good about my decision.

Ride is dialed in now. IMO high end aftermarket stuff wins on dampening and rebound control. AHC wins for versatility.

Is the ride more or less “tame” without the AHC?

 

[tbisaacs]

Is the ride more or less “tame” without the AHC?

Not exactly sure what tame means to you, but with adjustability of the components I’ve chosen I can relax it to trophy truck or tighten it up beyond AHC sport mode. It’s not as convenient as the selector in the cab but it’s only 4 knobs in my case, and range of adjustment is enormous.

 

[tbisaacs]

I’m curious if anyone here is running a thick rear sway bar and no front sway bar, similar to what Kai talks about here



Nolothane makes up to a 33mm rear for the LX and I’m tempted to try it without a front sway bar.

 

[turbo8]

I’m curious if anyone here is running a thick rear sway bar and no front sway bar, similar to what Kai talks about here



Nolothane makes up to a 33mm rear for the LX and I’m tempted to try it without a front sway bar.

No front swaybar and stock rear swaybar for me.

 

[sreyes1103]

has anyone done this delete with a 2016+?

 

[lx200inAR]

has anyone done this delete with a 2016+?

Disabling the AHC and AVS systems, no warning lights.

I can't wait for your report on how it handles since the sway bars are supposedly not thick/stiff enough for the non AHC suspension. I just took her out on a 5 miles stretch, and suspension wise it's feels like my 2011 Land Cruiser felt with the stock suspension. I'm going to take her on the...

forum.ih8mud.com

 

[tbisaacs]

Slightly longer shocks plus rear sway bar drop brackets made the rear axle boogie in a good way this week.

Wouldn’t quite call it long travel, but notably more than what I was getting stock.