Deleted threads (2 Viewers)

R U COMMITTED?

  • YES I AM GOING.

    Votes: 0 0.0%

  • NO I AM NOT GOING.

    Votes: 0 0.0%

  • I WILL GO SHOTGUN AND HELP PAY THE FUEL!

    Votes: 0 0.0%

  • I WOULD LOVE TO BUT CAN'T AFFORD TO HELP.

    Votes: 0 0.0%
  • Total voters
    0
  • Poll closed .

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I'll Be there Saturday Morning!

I dont know you guys yet, but i heard through a freind that has a friend in your group! if you dont mind ill be there Saturday Morning!!! with FJ PRIME

voltairesfj40b.jpg

1974 FJ40 "FJ PRIME"

I went to your website the old one, how do i contact you guys etc.

God bless!
 
Best way to get attention around here is to call one of us on this board an idiot. That usually does something.
 
Steve did you check the onion rings...they aught to be good and fried by now!
 
Archie, that's a good point. You see, I was trying to figure out how the crankshaft detractors could be oriented in such a way as to make more room for the onion rings. The stupid detractors are, of course, a series of bearings that interface with the fundamental central hermistor. But when the pinion gets out of whack, the interaction of the detractors will cause the spring loaded casings to fall out. And well all know what happens when those things hit the floor.

Steve, maybe the psudo-hydrocouple needs to be realigned with all of the ancillary hoppers, or is the magnetic attraction inherent with the centrifugal force of the spinning hydrocouple going to be enough to keep the hoppers in place?

I think if you have a collectable introspector that is able to phase shift, causing an inverse reaction in the torque normally applied to the hydrocouple, you could fix the pinion. But I'm not so sure.

If I remember correctly, when you apply the minium variable shankle to the windings, every other rotation of the hydrocouple will allow for the insertion of a hopper. But that's just a guess.
 
Ya'll have lost your freakin minds . Steve can't eat onion rings cause it gives him gas . We all know gas can't go in an diesel .

Welcome New Guy Voltaire ! What in sam hell is that in the picture ?

Look foward to meeting you Saturday , which way are you comin from ?

Like Carter said just post something up here and you'll get a bite from someone .
 
FJCRAWLER said:
You know if I have thought I should have called you before I got rid of my FJC . We could have swapped everything over to your FJC . :bang::bang:
Click to expand...

Lets don't speak of that again!

I think Smittybuilt is usually at the truck fest so I am going to pose the question to them. If they are not I will add a waterproof connector to my current box and add a cable inside.
 
FJCRAWLER said:
Ya'll have lost your freakin minds . Steve can't eat onion rings cause it gives him gas . We all know gas can't go in an diesel .

Welcome New Guy Voltaire ! What in sam hell is that in the picture ?

Look foward to meeting you Saturday , which way are you comin from ?

Like Carter said just post something up here and you'll get a bite from someone .
Click to expand...

Ill be headed up from new smyrna beach possibly with another fj40 friend...probably arrive at hardrock at 9am on sat where do we meet who do we look for pm me a phone if u can thxxxx
 
voltaire said:
Ill be headed up from new smyrna beach possibly with another fj40 friend...probably arrive at hardrock at 9am on sat where do we meet who do we look for pm me a phone if u can thxxxx
Click to expand...

I'll PM you my #.

They don't "open" until 10AM. You're welcome to come early, but usually the person who hands out the daily stickers for playing in the 4x4 area doesn't get there until right at 10.

To find us, you'll turn into Hard Rock, then follow the dirt road pretty much due west until you get to the back of the property. That's probably where we'll be. Just look for a collection of LandCruisers, you'll know you're in the right spot.

I don't think we'll have any trouble seeing you...
:D
 
They will be there , Smittybuilt always has great deal's on stuff . The best part is they have it there for you to take home that sameday .
 
FJCRAWLER said:
Archie are you going to beable to make it up this weekend ?

Are you still needing a tire ?
Click to expand...

I hope so...want to make sure I'm not contagious...picked up a little something from a Mexican Senorita at a Restaurant in Ocala the weekend before last. Ain't been right for over a week. :ban:

Momma's got a new pair of shoes! (and a full size spare now)...dying to get 'em dirty. Thanks for asking! :clap:
 
Last edited:
CruiseOrlando said:
Archie, that's a good point. You see, I was trying to figure out how the crankshaft detractors could be oriented in such a way as to make more room for the onion rings. The stupid detractors are, of course, a series of bearings that interface with the fundamental central hermistor. But when the pinion gets out of whack, the interaction of the detractors will cause the spring loaded casings to fall out. And well all know what happens when those things hit the floor.

Steve, maybe the psudo-hydrocouple needs to be realigned with all of the ancillary hoppers, or is the magnetic attraction inherent with the centrifugal force of the spinning hydrocouple going to be enough to keep the hoppers in place?

I think if you have a collectable introspector that is able to phase shift, causing an inverse reaction in the torque normally applied to the hydrocouple, you could fix the pinion. But I'm not so sure.

If I remember correctly, when you apply the minium variable shankle to the windings, every other rotation of the hydrocouple will allow for the insertion of a hopper. But that's just a guess.
Click to expand...

OK that was seriously the funniest post Ive EVER seen
 
FJCRAWLER said:
Just sent you a pm with info Voltaire .
Click to expand...

Thx! Any reason you guys moved to ih8mud? I'd gladly hook u guys up with a new site for free...forum and all...I do like the mobile ih8mud application though
 
I got a couple of issue to fix on my 60 but i should there Saturday morning... Havent been wheeling in a while, i'm really looking forward to it...

I also invited a guy that lives in Casselberry, i think he may be attending also... He's got a 40...
 
Last edited:
The more the better! Let's do this thing! Sooo looking forward to this :)
 
No Rocky, They will not buy this as one of the Hawaiian Tropic Girls!

1IZU9-100.jpg
 
But it would be entertaining none-the-less, so bring the outfit with you
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 3 (members: 0, guests: 3)

Share this page

Back
Top Bottom