Pretty sure it passed 9 a while ago. Still ticking away despite my attempts to kill it, a 1fz sounds pretty cool bouncing off the rev limiter.
December HAMOM 🤷🏽♂️
- Thread starter White Sheep
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Put me down as a tentative yes. Tough to plan 3 months out, especially as I approach year-end.
You know I’ll be there, and I’ll leave the bikes at home this time so work actually happens.
Gonna try and make this one.
Dont forget to bring the helmet for @GLTHFJ60 he may want to use it
I'm in
- Thread starter
- #28
Happy Thanksgiving everyone!! Just a friendly reminder that December 10th we are still on for the chop. Hope to see you all there.
Is the transmission spoken for?
- Thread starter
- #30
PM @AJR
@White Sheep are you going to start working Friday evening or do you plan on arriving Saturday morning?
@xychromosome this is the HAMOM we were telling you about at cape lookout. Should be a good time.
@xychromosome this is the HAMOM we were telling you about at cape lookout. Should be a good time.
- Thread starter
- #33
I work Friday, but if @AJR allows me to come Friday I'll be there Friday.
- Thread starter
- #34
I'll have to get back to you about the time. Let me speak to @AJR.strong chance I would be there as well, what time would things start?
seeing as I might be pulling the motor from my land cruiser this winter
I’ll come Friday if you guys start working. I’ll just plan on camping both nights.
I’ll be home around 6 or 7 Friday evening but people are welcome to show up whenever they want, the shop will be open.
@roflbox we’ll put you in charge of pulling the motor, you can get some practice
@roflbox we’ll put you in charge of pulling the motor, you can get some practice
- Thread starter
- #39
Making room for the LS.
All kinds of deconstruction happening