Custom 80 Rear Storage (1 Viewer)

[OhmStyles]

Do you have a link to a higher res pic of the carpet colors? Trying to match a tan or brown color to the 97 tan interior. Doent have to match per say but has to go with the color scheme if you follow. THanks again mate

 

[OhmStyles]

Almost ready to pull the trigger on some thing like this.

 

[OhmStyles]

anyway to implement a table storage space above or below the drawer? Since starting to look at your drawers i cam across drifta drawers and they do a table in theirs that is really nice. would like to see about using one of their tables in one of your drawers. Is this something you can do or have thought about?

 

[scrowley]

anyway to implement a table storage space above or below the drawer? Since starting to look at your drawers i cam across drifta drawers and they do a table in theirs that is really nice. would like to see about using one of their tables in one of your drawers. Is this something you can do or have thought about?

If it can fit within drawer compartment I can modify a drawer interior to fit it. I have a Coleman stove and aluminum foldable table in one drawer.

 

[scrowley]

Built myself a new set of drawers today. Mine where originals with no paddle latch, or drawer separators.

 

[Byoung7982]

I just placed my order!! I can not wait to get these! The craftsmanship looks well worth it! Scott thanks for taking the time to answer all of my questions!

 

[scrowley]

I just placed my order!! I can not wait to get these! The craftsmanship looks well worth it! Scott thanks for taking the time to answer all of my questions!

All built! Getting ready for shipping.

 

[Byoung7982]

I just got the pics. They look great! I can't wait for them to get here! Thanks again for your help! I'll be sure to update and post pics when it gets here.

 

[scrowley]

 

[scrowley]

 

[Byoung7982]

That was fast!! Ordered on 3/1 delivered today 3/13. Unbelievable attention to detail. I will post pictures of they way Scott shipped it and set it up for install. Got it put together in ten minutes. Getting it out of the packaging he shipped it in was a different story. Packed very very well. Not a scratch on it.

 

[scrowley]

Great!! Here's how it left.

 

[Byoung7982]

Finally got around to posting some pics of my drawers. Scott did an amazing job. From the design to the packaging and install instructions no detail was forgotten.

 

[Byoung7982]

More pics.

 

[OhmStyles]

Think I'm ready to order one if you have time. Pm me and let's work out the details.

 

[RFB]

Well I had a chance to build another set of my storage drawers for a local to CT. Mud member. I will be installing in his 80 next week at my shop. Customer made a couple changes and upgraded to locking pull handles, and drawer dividers. It was another fun build. Now I have a template for the 80 series for future builds. These units are rock solid and my favorite mod in my 80. Amazing for camping/sleeping in the back and a ton of organized storage.

Includes:
- Solid 3/4" AC ply construction
- All ply wood edges have 1/8" round over done with router. No sharp edges
- Side compartments flip up for easy to reach storage
- Front compartment (directly behind rear seat) Latch style lock
- European style hinges on all compartments
- 2 drawers. NO slides. Compression fit. Easy to use. Nothing to wear out or rattle. Maximizes size of drawer. Bottom panel of drawers are recessed 1/4" so the drawer glides on the two 3/4" wide side panels.
-4 Ring tie down anchors. Flush mount
-Locking pull latches on drawers. Flush mounted
-Entire unit is finished with 3 coats of acrylic clear coat. Sanded in between coats for a cabinet grade finish. Clear coat underneath all carpeting as well. This unit will stand up to lots of abuse.
-4 metric bolts and washers included for install. Unit bolts down to OEM 3rd row seat holes in body.
-Drawer interiors : 29 1/4" long X 19" wide X 7 3/4" deep
-Front storage behind rear seats : 42" long X 8" wide X 8" deep
-Flip up sides: 40 1/2" long X 8" wide. Not square. Wheel wells are on interior
-unit weighs 130 lbs. Complete.

Base price as shown on first page is $1400
*** EDIT *** LOCKING LATCH PULLS NOW INCLUDED ****
+$0000 for locking pull latch as shown. Included in base price is drawer pulls the same as anchors with no latch. IF pulls are desired deduct $50 from total.
+$40 for two extra tie down anchors in the middle of box for a total of 6.
+$90 for drawer dividers (as shown). Included in base price is no dividers.
I am willing to due other custom mods to fit people's needs.

****UPDATE.
SHIPPING AS FOLLOWS:
WEST COAST: $260
MID WEST: $225
EAST COAST: $200
FULLY ASSEMBLED AND FINISHED. JUST PUT ON SIDE WINGS AND SCREW ON DRAWER FACES WITH SUPPLIED HARDWARE.

2-4 week wait time for build plus shipping time.

*****Update: Carpet and fabric samples on pg.3 post 56. High quality marine grade carpet.

Link to my for sale thread on Yankee Toys club forum with more PICS of original unit I have installed in my 80
Interest in Custom Rear Cargo Storage
Check out the finish pics from this build.
SNSbuildingremodeling.com

Im close by in Ma. BUT I m gonna build my own Ill post up soon. Nice work.

 

[RFB]

Heres my best effort at making my own rear drawers, If I could do it again I would think twce. Now the price makes more sense.

 

[scrowley]

@RFB ....soooo. how many hours?? Looks good though. It's not for a beginner or faint hearted. I priced very fair for the amount of work it takes.

 

[RFB]

@RFB ....soooo. how many hours?? Looks good though. It's not for a beginner or faint hearted. I priced very fair for the amount of work it takes.

Id have to say I easily have 20-24 hors into this entire thing, and Its far from the perfect I had planned, but it wors exactly as needed and looks like I knew what I was doing. but all in all If I had the funds to spare I would have ordered one and used that time for something else, like say repacking or replacing the birfields.

 

[scrowley]

I have 2 units built if anyone is interested. They just need the final details and carpet.