Hey Guys
I am building a fridge stand / power station thing and had a question.
The box:
Inside the box will be a 1500watt inverter (with 2 addtional 4" cooling fans) and i am trying to figure out how to cleanly wire it up.
I want to connect the wires from the front of the vehicle to the outside of this box, then inside the box, i will be connecting the inverter and a series of 3 cigarette lighters up to it. My goal is to keep the wiring all nice and neat and have it all enclosed. My question is, what is the best way to do this? I was thinking of running a simple bolt through the side of the box and bolting the cables to the outside and then into the inside. Thinking that the wood would insulate the bolts. This sounds kind of ghetto and i am not sure it would work. I know there must be a better way, no? Is the bolt idea so simple it will work? There would be a lot of juice running through it!
Any ideas, products to try, or suggestiosn to get this to work?
Thanks a bunch
I am building a fridge stand / power station thing and had a question.
The box:
Inside the box will be a 1500watt inverter (with 2 addtional 4" cooling fans) and i am trying to figure out how to cleanly wire it up.
I want to connect the wires from the front of the vehicle to the outside of this box, then inside the box, i will be connecting the inverter and a series of 3 cigarette lighters up to it. My goal is to keep the wiring all nice and neat and have it all enclosed. My question is, what is the best way to do this? I was thinking of running a simple bolt through the side of the box and bolting the cables to the outside and then into the inside. Thinking that the wood would insulate the bolts. This sounds kind of ghetto and i am not sure it would work. I know there must be a better way, no? Is the bolt idea so simple it will work? There would be a lot of juice running through it!
Any ideas, products to try, or suggestiosn to get this to work?
Thanks a bunch