CLCC BBRC Swap Meet - April 21st
- Thread starter Felix
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #2
If anybody is planning on selling and would like to post a list of stuff they plan to bring, you can do that here.
- Thread starter
- #3
I just sent out the swap meet flyer to the CLCC mailing list. If you're not on that list and you want a copy of the flyer to distribute, please let me know.
BEER
Just so everyone knows, I checked out Blue and Grey Brewerys web page.
Free tours and tastings every Saturday 10 am - 1 pm.
Retail sales Wednesday 2-6, Friday 3-8, and Saturday 10-1.
PLEASE ASK FOR OUR BEERS WHEREVER YOU GO!
Dont know about you but ill be bringing my growlers. And for the price i might just pick up a Party Pig, probably the best addition for any 55 owner.
Check out the page.
http://www.blueandgraybrewingco.com/
Just so everyone knows, I checked out Blue and Grey Brewerys web page.
Free tours and tastings every Saturday 10 am - 1 pm.
Retail sales Wednesday 2-6, Friday 3-8, and Saturday 10-1.
PLEASE ASK FOR OUR BEERS WHEREVER YOU GO!
Dont know about you but ill be bringing my growlers. And for the price i might just pick up a Party Pig, probably the best addition for any 55 owner.
Check out the page.
http://www.blueandgraybrewingco.com/
- Thread starter
- #5
Cool, thanks Neal. I haven't talked to Lance, yet. But I'll be sure to ask him about any brewery connections.
I just posted some invites in the forums of Appalachian LCs, Buckeye Birfield, and Gothem City. Hopefully that wasn't too much spam.
I just posted some invites in the forums of Appalachian LCs, Buckeye Birfield, and Gothem City. Hopefully that wasn't too much spam.
How and where do I register?
I brought some cruiser stuff down to the last swap meet at GMU and would like to try and get rid of the following:
Misc; smog stuff egr, driveshafts form 4 speed setups, 2f intake and exhaust manifolds, top sides and amby doors (NIB fiber glass), repaired lat model gas tank.
I'm lookin' for a 8274 in good shape and don't want to take any of this crap home.
Any idea as to how many folks are showing up? Common Hotel out of towners are staying at? I saw the Blue and Gray brewery bit on the other page, that looks promising!
Any chance lance is gonna put a new 3/4 tub in that raffle???? "
"
See you all there!
I brought some cruiser stuff down to the last swap meet at GMU and would like to try and get rid of the following:
Misc; smog stuff egr, driveshafts form 4 speed setups, 2f intake and exhaust manifolds, top sides and amby doors (NIB fiber glass), repaired lat model gas tank.
I'm lookin' for a 8274 in good shape and don't want to take any of this crap home.
Any idea as to how many folks are showing up? Common Hotel out of towners are staying at? I saw the Blue and Gray brewery bit on the other page, that looks promising!
Any chance lance is gonna put a new 3/4 tub in that raffle???? "
"See you all there!
help w/springs 4 sale
I have some springs to sell at the swap meet, but I cannot be there until afternoon, since my son has a TKD belt advancement in the am. Anyone willing to take these items for me in the am? I'll provide details and pricing, if so. I'll even pick up the $10 for the parking space.
I have some springs to sell at the swap meet, but I cannot be there until afternoon, since my son has a TKD belt advancement in the am. Anyone willing to take these items for me in the am? I'll provide details and pricing, if so. I'll even pick up the $10 for the parking space.
Blue77FJ40
SILVER Star
I have a Warn 9.5ti winch to sell. Rope and hause not included. Comes with mounting plate for an FJ40 and cover. I'll have other stuff too. SOLD
- one pair of front ubolt skidplates (new)
- fan clutch with an inch longer than stock shaft: should fit FJ60 (new)
- set of shock boots (new)
- 2F mount for saginaw power steering pump (JTO) used
- slightly used stock clutch and pressure plate for FJ40
- one pair of front ubolt skidplates (new)
- fan clutch with an inch longer than stock shaft: should fit FJ60 (new)
- set of shock boots (new)
- 2F mount for saginaw power steering pump (JTO) used
- slightly used stock clutch and pressure plate for FJ40
Last edited:
I just posted a craigslist ad in the "for sale" section and our Ebay ad will be up for publicity anytime now. If my slightly defective and new $10,000 radiator does not sell (need to sell something to run the auction!) I will be selling it at the swap meet at a more realistic price! I may be selling some interior carpet or other misc. undiscovered parts I forgot I own.....
Here's the Craigslist ad
http://washingtondc.craigslist.org/nva/car/310758445.html
Ebay ad
http://cgi.ebay.com/ebaymotors/ws/e...MESE:IT&viewitem=&item=180106590944&rd=1&rd=1
Here's the Craigslist ad
http://washingtondc.craigslist.org/nva/car/310758445.html
Ebay ad
http://cgi.ebay.com/ebaymotors/ws/e...MESE:IT&viewitem=&item=180106590944&rd=1&rd=1
- Thread starter
- #11
The Grand Prize for the raffle will be a WINCH!
Either a Superwinch or Warn, I'm not sure, yet.
Either a Superwinch or Warn, I'm not sure, yet.
Cruiser804
SILVER Star
I plan to bring this stuff. If anyone needs something let me know and I'll hang on to it.
79 FJ40
Radiator Support - good condition, some surface rust at the bottom - 30.00
Bottle Jack Bracket - crude POR15 job, 15.00
Hardtop CAP only. I am not bringing this. Free to anyone who will pick it up.
78 and earlier filler neck cover, good condition. 15.00
96 FZJ80
Rear non-locking diff 123k 300.00
Rear PS axle non-locking 123k 50.00
DS complete floor wiring harness - non-locker 75.00
Sill Harness - non-locker - 25.00
NEW - inner front axles - 75.00 each
OEM front door speakers - one works, other don't 10.00
79 FJ40
Radiator Support - good condition, some surface rust at the bottom - 30.00
Bottle Jack Bracket - crude POR15 job, 15.00
Hardtop CAP only. I am not bringing this. Free to anyone who will pick it up.
78 and earlier filler neck cover, good condition. 15.00
96 FZJ80
Rear non-locking diff 123k 300.00
Rear PS axle non-locking 123k 50.00
DS complete floor wiring harness - non-locker 75.00
Sill Harness - non-locker - 25.00
NEW - inner front axles - 75.00 each
OEM front door speakers - one works, other don't 10.00
swap meet
I was going to bring a 3 spd tranny/tcase from my 69 to try and get rid of but cant get it off the back of the block because the engine is siezed. Any tips? Unless anyone wants them with the block still attached. Thats a lot of work to get it on my truck if no one is interested though. $100?
I also have an oem soft top frame from the 69, if anyone is interested in that I can bring it. $150
If anyone has any interest, i can send pictures so I don't have to load this stuff up just to bring it back.
Thanks,
Brian
I was going to bring a 3 spd tranny/tcase from my 69 to try and get rid of but cant get it off the back of the block because the engine is siezed. Any tips? Unless anyone wants them with the block still attached. Thats a lot of work to get it on my truck if no one is interested though. $100?
I also have an oem soft top frame from the 69, if anyone is interested in that I can bring it. $150
If anyone has any interest, i can send pictures so I don't have to load this stuff up just to bring it back.
Thanks,
Brian
- Thread starter
- #14
Grand prize is the Superwinch EP9.0!!!
Other prizes will include:
- FJ40 Half doors from Belowdeck Fabrication
- Gift certficates for parts and service at Iron Pig Offroad
- some other stuff
- and maybe some
Other prizes will include:
- FJ40 Half doors from Belowdeck Fabrication
- Gift certficates for parts and service at Iron Pig Offroad
- some other stuff
- and maybe some
- Thread starter
- #15
Plus, we have arranged for private tours of the Blue and Gray Brewing Company just a short walk from IPOR!
IPOR
IronPigOffroad.com
Jeff, the owner of Blue and Gray Brewing, is a great guy and I sure will be happy to have his master brewer show us around. (they are right across the parking lot from IPOR) Fred Red is probably his most popular, but I prefer the pale ale.
We've been really busy preparing for GSMTR but if you all can excuse the mess we'll be here working on Saturday and would be happy to show you around the new shop. (yes, we do have Premium and Economy tubs from our Heritage Sheetmetal line here for you all to see in person!)
Lance
www.ironpigoffroad.com
We've been really busy preparing for GSMTR but if you all can excuse the mess we'll be here working on Saturday and would be happy to show you around the new shop. (yes, we do have Premium and Economy tubs from our Heritage Sheetmetal line here for you all to see in person!)
Lance
www.ironpigoffroad.com
Hey all.
I'll be there in an overloaded red Nissan PU. Stuff in the Nissan includes:
FJ62 Doors (all four) - $25 each
FJ62 Drivers Fender (aftermarket) - $25
FJ62 Wheels and like new stockish tires (5 of em) -$200/all
1 BRAND NEW Mickey Thompson 16 x 8 Classic II with 1 BRAND NEW 36x13.50 Bias IROK on it. - $200
Pair of early FJ40 Doors - $100 for the pair
4 Stock 77 FJ40 Birfields (never been wheeled on to my knowledge)- $25/each
1 Stock 77 long side axle shaft - $25
FJ40 rear diamond plate corners - $20
Used FJ40 radiator -$20
2 Rebuilt Warn Hubs $50/pair
2 Nasty Warn Hubs $20/pair
Lots of misc FJ62 parts (and more still in the yard).
I have to leave early & I don't want to take any of it home! (Don't think the old Nissan can survive a round trip in its current load status!) See you tomorrow!
Tim
I'll be there in an overloaded red Nissan PU. Stuff in the Nissan includes:
FJ62 Doors (all four) - $25 each
FJ62 Drivers Fender (aftermarket) - $25
FJ62 Wheels and like new stockish tires (5 of em) -$200/all
1 BRAND NEW Mickey Thompson 16 x 8 Classic II with 1 BRAND NEW 36x13.50 Bias IROK on it. - $200
Pair of early FJ40 Doors - $100 for the pair
4 Stock 77 FJ40 Birfields (never been wheeled on to my knowledge)- $25/each
1 Stock 77 long side axle shaft - $25
FJ40 rear diamond plate corners - $20
Used FJ40 radiator -$20
2 Rebuilt Warn Hubs $50/pair
2 Nasty Warn Hubs $20/pair
Lots of misc FJ62 parts (and more still in the yard).
I have to leave early & I don't want to take any of it home! (Don't think the old Nissan can survive a round trip in its current load status!) See you tomorrow!
Tim
I would be interested in the hard top cap. I'll be at swap meet around noon. I'll be in a miller lite blue fj40 w black soft top. My name is don
Who won the winch?
How'd it go??? I was in the Big Easy for the week so I couldn't attend.
