If anyone has one of these silly fiber plastic splash pans for a hundy you are planning on throwing away lmk. Mine tried to fight a Louisiana rain and flooded parking lot and lost.
Buying, Selling & Trading (2 Viewers)
- Thread starter bagochips76
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Looking to get $1500
Hey guys looking to sell my Dobinson's 3.5in lift for an FJ/FZJ80. Long story short I've decided I would rather have a 2in lift opposed to a 3.5in due to all of the caster issues, Panhard ETC a larger lift induces. Everything is new besides the coils, they have about 3000 miles on them (C97-144VT) (C59-615V). The kit originally came with 6in lift coils but have been replaced with the 3.5s. So that is why the caster plates look oversized.
Hey guys looking to sell my Dobinson's 3.5in lift for an FJ/FZJ80. Long story short I've decided I would rather have a 2in lift opposed to a 3.5in due to all of the caster issues, Panhard ETC a larger lift induces. Everything is new besides the coils, they have about 3000 miles on them (C97-144VT) (C59-615V). The kit originally came with 6in lift coils but have been replaced with the 3.5s. So that is why the caster plates look oversized.
Redundant picture deleted
Hey all. I have an FJ40 antenna that I bought and wound up not needing. It is brand new in the package. It's this guy: Antenna - FJ40 - FJ45 - FJ55 - BJ - 1958-1984 - https://cruisercorps.com/collections/antennas/products/antenna-fj40-45-55
Hoping someone around can use it. Call it $20 or a case of beer and it's yours.
Hoping someone around can use it. Call it $20 or a case of beer and it's yours.
WeatherTech Mats for 200 series and LX's 2008-2012. Dusty from storage but actually in excellent shape.
$50
$50
90WT
SILVER Star
Your 40 has a radio!? Ok, I'm jealous.
And it has camelflage! (not a typo)
Anyone have a cheap set of rims that would fit an 80 series? Looking for 17" or 16". Id like to get some 10plys on my truck before goose lake.
Found some on marketplace! Funny enough from an X Overland employee.
I picked up these SPC UCAs (#35470) for my GX460 but after consideration I think I'll wait to lift it a little while longer.
I bought them used. The balljoints are new but the bushings should be replaced sometime soon.
From my understanding, these will fit 2005-2023 Tacomas and with different balljoints, will work with 2003-2024 4Runners and GX460s and GX470s.
Looking to get $300. I'm in Bozeman.
I bought them used. The balljoints are new but the bushings should be replaced sometime soon.
From my understanding, these will fit 2005-2023 Tacomas and with different balljoints, will work with 2003-2024 4Runners and GX460s and GX470s.
Looking to get $300. I'm in Bozeman.
I have headlights for a 95 80 series. (Free)Left side has a pin hole. Just replaced with new depos.
I have a fan clutch that needs new fluid. Free.
Front seats need reupholstered. Free.
I have a fan clutch that needs new fluid. Free.
Front seats need reupholstered. Free.
Looking to sell my Glock G20 10mm. Comes with pistol, two magazines and a Gunfighters Inc Kenai chest holster. The Kenai is the best woods carry holster i have ever used, secure and comfortable. They retail for over $150. Also they are comfortable for carry while sitting in a vehicle since it doesnt jam into your hip. I will take $625 OBO for all of it FTF. I am in Helena but often around Bozeman.
orange pelican not included unless you really want it. Then we can figure that out.
orange pelican not included unless you really want it. Then we can figure that out.
Last edited:
Looking for front seats from a 1990-1995 4Runner.
40 year old seats are killing my back and the 2nd gen 4Runner seats swap in easily.
40 year old seats are killing my back and the 2nd gen 4Runner seats swap in easily.
I have some Con-Ferr front and rear bumpers and a roof rack for a FJ40. Also an old Ramsey winch if you want it (not working currently). All have some surface rust but still solid. Make an offer. Just looking to pass them along to someone who can use them. Located in Helena.
wileycoyote
Watch this......
Put me down for the rack pending price. Shoot me a text and I will see about coming up. 2707843540. Thanks Chad
Those are cool old school parts.
90WT
SILVER Star
Some decently priced rigs popping up lately. Somebody buy this 60 so it gets out of my FB marketplace feed.
1985 Landcruiser $6k
1985 Landcruiser $6k
rkymtnflyfisher
Trout Bum
This looks interesting.
missoula.craigslist.org
1996 TOYOTA 90 SERIES diesel for sale - Missoula, MT - craigslist
🔥 1996 Toyota Land Cruiser – Custom 90 Series 1KZ Turbo Diesel | 4WD | 53K Miles | Straight-Piped, Intercooled Weapon Upgraded Ironman Suspension • Armored • One-of-One Rig 🚨 NOW AVAILABLE – BUILT...
In search of parts. Calling all 05+ 4 Runner / GX owners.
Part number - 08925-35870
Otherwise, the receiver that I was sent is not lining up wit the older style (03-early 04) center mount hitch seen below
------
I believe I have what's on the right and need what's on the left shown below
------
- I'm looking for the later model center mount bracket, used for mounting the OEM trailer receiver
>> More info and pics here. - I believe mostly later model 4runners and GX use this bracket, maybe even LX?
Part number - 08925-35870
Otherwise, the receiver that I was sent is not lining up wit the older style (03-early 04) center mount hitch seen below
------
I believe I have what's on the right and need what's on the left shown below
------
