Buyin', Sellin', Tradin' (2 Viewers)

[RSHARPfzj80]

Posted from a brick.

You got any pics of them?

 

[Hugh Heifer]

You got any pics of them?

The 60 ones are off the truck we parted. The 40 ones are the earlier cursive ones. They are brand new. I was going to use them but the aprons I got were later from a later year model. Trade you the 60 ones for the duct.

 

[TNFJ40]

Hey guys, I'm looking for a 15" x 8" 6-lug steel rim to use for a spare wheel. It has to be 2.5" backspacing though. Preferably just a standard white wagon wheel type. Does anyone either have one for sale or know where I can get one? I've tried a bunch of the online places but apparently the 2.5" backspacing is not a standard size anymore. Thanks. - Shawn

 

[wileycoyote]

Just a standard wheel off an 81 work? If so pretty sure I have one I can bring to gsmtr. If so how about a 12 pk of beer?

 

[RSHARPfzj80]

Hey guys, I'm looking for a 15" x 8" 6-lug steel rim to use for a spare wheel. It has to be 2.5" backspacing though. Preferably just a standard white wagon wheel type. Does anyone either have one for sale or know where I can get one? I've tried a bunch of the online places but apparently the 2.5" backspacing is not a standard size anymore. Thanks. - Shawn

Ill look too but I think all I have are 6's, 7's and 10's!

 

[DSLTOY]

If you can't find a used one try 4 wheel parts, the did carry them in the procomp wheel.

 

[jason in tn]

Hey guys, I'm looking for a 15" x 8" 6-lug steel rim to use for a spare wheel. It has to be 2.5" backspacing though. Preferably just a standard white wagon wheel type. Does anyone either have one for sale or know where I can get one? I've tried a bunch of the online places but apparently the 2.5" backspacing is not a standard size anymore. Thanks. - Shawn

I have several 6 lug white steelies but I'm not sure of the width or back spaceing. I've got a couple off a 83 p/u but it will take some digging to get them out.

Sent from my detachment from reality.

 

[TNFJ40]

Thanks for the replies so far. I need an 8" rim (for a 12.5" tire) so a stock rim won't work. ProComp still makes the rim I need but it's now considered a special order with a 4-6 wk lead time. If I don't find one this week I'll probably just order the special and hopefully I won't need it at GSMTR. This situation has arisen because I was wheeling up at Harlan last week and sliced the sidewall on one of my Swampers ($$damnit$$). Then I discovered that my spare (7" rim) wouldn't fit on the front without rubbing the TRE (due to upgrading to the heavy duty tie rods and TRE's).

 

[TNFJ40]

In addition to the spare wheel already posted, I am also looking for a set of 16" rims (either 7" or 8" wide) that will fit on my 1996 FJZ80. I'm not real picky about whether they are steel or aluminum as long as they fit without having to use spacers. I just plan to use them with a set of mud tires for trail riding. Thanks.

 

[TNFJ40]

Also have a couple of things to sell. Set of 1.25" wheel spacers that fit an FJZ80 - $40. Auburn limited-slip unit with carrier bearings that fits FJ40 - $100.

 

[jynx]

Also have a couple of things to sell. Set of 1.25" wheel spacers that fit an FJZ80 - $40. Auburn limited-slip unit with carrier bearings that fits FJ40 - $100.

What brand spacers? I might be interested if they have the pressed in studs come with mounting hardware.

 

[sk8salomon]

Anybody have a used RH rear tail light lens for a 60 they can bring to Gsmtr?

 

[jynx]

Anybody have a used RH rear tail light lens for a 60 they can bring to Gsmtr?

Just wait for Rance to chime in, I bet he has one in "the barn"

 

[RSHARPfzj80]

Just wait for Rance to chime in, I bet he has one in "the barn"

Actually......... Not many 60-62 parts around except for a set of factory wheels and a pass rear door ask Goode he might have an extra one

 

[jason in tn]

In addition to the spare wheel already posted, I am also looking for a set of 16" rims (either 7" or 8" wide) that will fit on my 1996 FJZ80. I'm not real picky about whether they are steel or aluminum as long as they fit without having to use spacers. I just plan to use them with a set of mud tires for trail riding. Thanks.

I've got a set of third gen runner tri spokes if your interested. They should fit, your welcome to try them if they work I will sell them cheap if not I will get them back, just let me know.

Sent from my detachment from reality.

 

[mwalls54]

Thanks for the replies so far. I need an 8" rim (for a 12.5" tire) so a stock rim won't work. ProComp still makes the rim I need but it's now considered a special order with a 4-6 wk lead time. If I don't find one this week I'll probably just order the special and hopefully I won't need it at GSMTR. This situation has arisen because I was wheeling up at Harlan last week and sliced the sidewall on one of my Swampers ($$damnit$$). Then I discovered that my spare (7" rim) wouldn't fit on the front without rubbing the TRE (due to upgrading to the heavy duty tie rods and TRE's).

worst case carry a wheel spacer for the spare.

 

[RSHARPfzj80]

worst case carry a wheel spacer for the spare.

We've got a "Thinker" on our hands

 

[wileycoyote]

Bringing pto winch setup, warn 8274 , doors hoods fenders and whatever else I have. Too much crap in my shop. Need something shoot me a pm and I will try to bring it to gsmtr.

 

[mwalls54]

Bringing pto winch setup, warn 8274 , doors hoods fenders and whatever else I have. Too much crap in my shop. Need something shoot me a pm and I will try to bring it to gsmtr.

What do you want for the 8274?

 

[TNFJ40]

The wheel spacers are actually 1.5". Yes, they have the pressed in studs and come with the lug nuts. Not sure what brand they are, but I bought them from Iron Pig.