bolt in roll cage for the 80

[Taz]

this looks interesting ... any body seen one of these installed?

http://www.safetydevices.com/images...df?PHPSESSID=96f6272ac4f973d8b58ea32010439eba

Goto page 3

 

[4WD Toyota Owner Magazine]

Or Metal Tech

I was talking to Mark at Metal Tech Cage and he mentioned in passing that he was working on an 80-series cage. Give him a call!

www.metaltechcage.com

Dave

 

[4WD Toyota Owner Magazine]

Hmm and that cage on the Safety Devices pdf says no sunroof and no air-con.

dave

 

[alkaline747trio]

It looks like the sun-roof wouldn't be a problem, unless it interfers with the switch. The air-cond' might be rear a/c which we don't get anyways.

 

[T Y L E R]

this looks interesting ... any body seen one of these installed?

http://www.safetydevices.com/images...df?PHPSESSID=96f6272ac4f973d8b58ea32010439eba

Goto page 3

Any pics of an actual install?



TY

 

[photogod]

The headliner is also two or three inches lower in the front because of the sun roof.

 

[Hanna Quality]

www.safetydevices.com has some clean looking bolt in cages

the 80 cage might fit if the B pillar bar can come down low enough to fit the sun roof

 

[wildsmith]

I have one of those Safety Devices cages in my 80. Definitely won't fit with a sunroof. Normal aircon isn't a problem, don't know about dual systems. The ends of the door arm rests have to be trimmed to clear the tubes. There are some pics of my install here: www.mudtoys.com/toys/cage.htm .

Jon.